| Author |
Message |
Steve Magnusson (91tr)
Intermediate Member
Username: 91tr
Post Number: 1387
Registered: 1-2001
| | Posted on Monday, February 03, 2003 - 9:59 pm: | |
Tommy -- I'll send the same email to you tomorrow (but most of it's been discussed before so also try the search suggested below). |
Tommy Anastasiou (Tommya)
New member
Username: Tommya
Post Number: 32
Registered: 10-2002
| | Posted on Monday, February 03, 2003 - 5:28 pm: | |
Steve,
Do you mind sharing the info ??
Thanks in advance
Tommy A |
Jerry W. (Tork1966)
Member
Username: Tork1966
Post Number: 415
Registered: 7-2001
| | Posted on Monday, February 03, 2003 - 12:07 pm: | |
Steve, that information was no short of awesome. Thanks a million! |
Steve Magnusson (91tr)
Intermediate Member
Username: 91tr
Post Number: 1385
Registered: 1-2001
| | Posted on Monday, February 03, 2003 - 9:58 am: | |
Do a search on "308 air injection" (AND mode).
(I've also emailed you some information separately.) |
Jerry W. (Tork1966)
Member
Username: Tork1966
Post Number: 414
Registered: 7-2001
| | Posted on Monday, February 03, 2003 - 9:55 am: | |
The 4 air injection pipes in the head. They all come together into 1 pipe and then hook up to a hose on the driver's side. |
Steve Magnusson (91tr)
Intermediate Member
Username: 91tr
Post Number: 1383
Registered: 1-2001
| | Posted on Monday, February 03, 2003 - 9:47 am: | |
Jerry -- Are you talking about the 4 exhaust gas analyzing pipes in the header or the 4 air injection pipes in the head? |
Jerry W. (Tork1966)
Member
Username: Tork1966
Post Number: 413
Registered: 7-2001
| | Posted on Monday, February 03, 2003 - 9:39 am: | |
What is the purpose of these pipes and can I eliminate them? Just had my rear header coated in aluminum at Jet Hot and would like the cleaner look of the pipes not being there if possible. If eliminated, obviously I would need to plug the 4 holes in the head. Thanks, Jerry. |