| Author |
Message |
ken rentiers (Rentiers)
Junior Member
Username: Rentiers
Post Number: 75
Registered: 2-2003
| | Posted on Sunday, February 23, 2003 - 7:00 pm: | |
Thanx Paul that's what I thought. Nm not ft lbs - OK.
I'll pick up a larger sleeve tomorrow.
-ken- |
Paul Hill (348paul)
Junior Member
Username: 348paul
Post Number: 59
Registered: 12-2002
| | Posted on Sunday, February 23, 2003 - 5:13 pm: | |
UFI Part no.191993
328 GTB / GTS
25 � 1 Nm
|
ken rentiers (Rentiers)
Junior Member
Username: Rentiers
Post Number: 74
Registered: 2-2003
| | Posted on Sunday, February 23, 2003 - 1:30 pm: | |
Just in the process of an oil change on the 328, using the new UFI filter. These are somewhat larger diameter than the old filter I had been using. Is just hand tight OK or do I need another torque wrench sleeve to get it right. I have been using 25lbs torque on the oil filters.
Just don't want one going skyward at 75 mph....
-ken- |