Simple 348 question

Log Out | Topics | Search Moderators | Edit Profile

Author Message philip (Fanatic1) New member Username: Fanatic1 Post Number: 16 Registered: 2-2003 Posted on Friday, February 28, 2003 - 9:14 am:    thanks guys!!! I love this chat site! Carl Rose (Carl_rose) Junior Member Username: Carl_rose Post Number: 84 Registered: 10-2002 Posted on Friday, February 28, 2003 - 9:00 am:    Phillip, the 12mm hex socket drive can be a bit of a challenge. You might find a local tool supplier stocks, or try: www.Grainger.com www.Snapon.com www.McMaster.com All carry hex sockets & replacement bits as I recall McM was the least expensive. Search term "hex bit". Carl mike Vettraino (348tb) New member Username: 348tb Post Number: 3 Registered: 2-2003 Posted on Friday, February 28, 2003 - 8:55 am:    Allen W/12mm at sears!!!!!!!! philip (Fanatic1) New member Username: Fanatic1 Post Number: 14 Registered: 2-2003 Posted on Friday, February 28, 2003 - 8:23 am:    to change the oil in the 348, there are two plugs....the tank plug has a standard "bolt head" the pan plug is a "hex"head....like an allen head....does anyone know what size hex head this is and where can I get a ratchet drive hex this big. I've been to every auto parts store and no one has anything near this size. Thanks! Sorry for the simplicity, I'm a new owner.