| Author | Message | ||
| Terry Limehouse (Terrykarr)
Junior Member Username: Terrykarr Post Number: 90 Registered: 12-2002 |
They fit flush. You can't buy them that way, it takes hours and hours to fit them and make the brackets. I doubt there is even one fender on these cars [as true for many of the ferrari's] that are the same. For instance, the right cover on my car is about .5 inches wider than the left. Therefore, finding a set made to fit, a specific car, is virtually impossible. I bought a set of covers that had a shape to them, but they were about and inch to an inch and a half wider than needed [I almost think I would have been better off doing them from scratch]. I've done a lot of things, as far as fabing goes, but this ranked right up there as, tough! On a scale from one to ten, one being the easiest, its a ten. | ||
| william speer (Wspeer)
Junior Member Username: Wspeer Post Number: 175 Registered: 8-2002 |
terry, where did you get the headlight covers? as they are installed now, do the covers overlap the body work or are they flush. the pics make it appear as though they overlap. | ||
| L. Wayne Ausbrooks (Lwausbrooks)
Intermediate Member Username: Lwausbrooks Post Number: 1280 Registered: 8-2002 |
 | ||
| Terry Limehouse (Terrykarr)
Junior Member Username: Terrykarr Post Number: 89 Registered: 12-2002 |
Trick photography. | ||
| L. Wayne Ausbrooks (Lwausbrooks)
Intermediate Member Username: Lwausbrooks Post Number: 1274 Registered: 8-2002 |
Terry, you put the Cromodoras back on! | ||
| Terry Limehouse (Terrykarr)
Junior Member Username: Terrykarr Post Number: 87 Registered: 12-2002 |
       | ||
| Dr Tommy Cosgrove (Vwalfa4re)
Member Username: Vwalfa4re Post Number: 864 Registered: 5-2001 |
MAN, those look great! | ||
| Terry Limehouse (Terrykarr)
Junior Member Username: Terrykarr Post Number: 86 Registered: 12-2002 |
Well, I finshed them about 2 hours ago. Want to thank the ones who helped me out with there info. Attached is the finshed product, after about 50 hours.     |