| Author |
Message |
Richelson (Richelson)
Member
Username: Richelson
Post Number: 851
Registered: 12-2001
| | Posted on Wednesday, April 02, 2003 - 5:54 am: | |
Mlemus did you have to modify the wires in anyway for them to work? Do they fit all 308s? |
Andy Falsetta (Tuttebenne)
New member
Username: Tuttebenne
Post Number: 19
Registered: 3-2003
| | Posted on Tuesday, April 01, 2003 - 7:54 pm: | |
Original wires are 7mm, happen to be red and fit everywhere fine. I have 8mm on my car but 8mm will be slightly difficult to insert into the dual distributor cap (don't know about the euro cap - sorry) and you will have a bit of difficulty routing them through the brackets (looms). The 7mms fit best. |
DJParks (Djparks)
Junior Member
Username: Djparks
Post Number: 99
Registered: 2-2003
| | Posted on Sunday, March 30, 2003 - 10:35 pm: | |
Hi Tazio, If you want 45, 90 or 120 degree boots you may want to look into Taylor Wires. Mine are from the Universal set #073251 with 90 degree boots at the plugs. Cut ends at the cap. If I had it to do over again I might go with the 45 boots instead.
8 mm high heat, red, silicone with spiral core. |
"The Don" (Mlemus)
Advanced Member
Username: Mlemus
Post Number: 3368
Registered: 8-2002
| | Posted on Sunday, March 30, 2003 - 9:08 pm: | |
Ignition wires: BOSCH 7mm Premium wire set, for an 8 cylinder Chrysler truck, part number 098608 |
"The Don" (Mlemus)
Advanced Member
Username: Mlemus
Post Number: 3367
Registered: 8-2002
| | Posted on Sunday, March 30, 2003 - 9:07 pm: | |
What year? |
Tazio Nuvolari (Nuvolari)
Junior Member
Username: Nuvolari
Post Number: 167
Registered: 9-2002
| | Posted on Sunday, March 30, 2003 - 8:59 pm: | |
Things are never there when you need them and now I can't find it in the archives. I am changing over from dual to a single electronic distibutor on my 308 but I am not sure where to get ignition cables and what I should expect to pay for them. Any leads, suggestions or links would be greatly appreciated.
My only proviso is that I want them red because I like the way that colour looks in the engine bay. |