| Author |
Message |
J. Grande (Jay)
Intermediate Member
Username: Jay
Post Number: 1184
Registered: 10-2001
| | Posted on Tuesday, April 08, 2003 - 10:27 pm: | |
Andrew, tried emailing you with no response. I'm interested! |
J. Grande (Jay)
Intermediate Member
Username: Jay
Post Number: 1180
Registered: 10-2001
| | Posted on Saturday, April 05, 2003 - 5:04 pm: | |
Jeff...Ouch! |
J. Grande (Jay)
Intermediate Member
Username: Jay
Post Number: 1175
Registered: 10-2001
| | Posted on Friday, April 04, 2003 - 4:44 pm: | |
Andrew, can you send me some pictures?
|
Ken (Allyn)
Member
Username: Allyn
Post Number: 811
Registered: 10-2001
| | Posted on Friday, April 04, 2003 - 10:18 am: | |
$250 is cheap. My Lotus half shafts are made of unobtainium and NOS sell for what a windshield sells for. Used is cheaper but very few are out there that are any good. |
Andrew A. Illes (Andyilles)
New member
Username: Andyilles
Post Number: 5
Registered: 10-2002
| | Posted on Friday, April 04, 2003 - 9:08 am: | |
Jay... are the GT4 halfshafts the same as 308? I have an extra set of unused, rebuilt ones I don't need. Paid the same as Rutland quoted you. Don't have rotors, but practically every other dry-sump 2-valve part you could think of.
You can email me direct at [email protected] |
Jeff Howe (Ferrari_uk)
Junior Member
Username: Ferrari_uk
Post Number: 196
Registered: 12-2002
| | Posted on Friday, April 04, 2003 - 2:44 am: | |
Hi Jay.
No drive shafts here but we have rotors for $185 each. Ouch I hear you say....!
JH |
J. Grande (Jay)
Intermediate Member
Username: Jay
Post Number: 1173
Registered: 10-2001
| | Posted on Thursday, April 03, 2003 - 9:53 pm: | |
Also looking for a pair of used rear rotors with some meat on them. |
J. Grande (Jay)
Intermediate Member
Username: Jay
Post Number: 1170
Registered: 10-2001
| | Posted on Thursday, April 03, 2003 - 6:37 pm: | |
I was going through the bins of parts that haven't been put on the 308 GT4 yet and realized I'm missing both 1/2 shafts. Seems the Previous owner lost them at one of the many shops he had the car "serviced" at. Rutlands wants about $250US each side for a used set, wondering if anyone had some kicking around. It's getting close to the wire and I don't want to get stuck not being able to drive because of not having any axles! |