| Author | Message | ||
| John Millard (Jmillard308)
New member Username: Jmillard308 Post Number: 2 Registered: 5-2003 |
328 front wheels fit on a 308 with the following mods - new (smaller diameter) dust cover on front hubs - needs to be fabricated. Small extension to wheel hub to accomodate centre badge (also needs to be fabricated). Longer wheel bolts required - 328 wheel thicker. Rears fit straight on. | ||
| John Millard (Jmillard308)
New member Username: Jmillard308 Post Number: 1 Registered: 5-2003 |
328 front wheels fit on a 308 with the following mods - new (smaller diameter) dust cover on front hubs - needs to be fabricated. Small extension to wheel hub to accomodate centre badge (also needs to be fabricated). Longer wheel bolts required - 328 wheel thicker. Rears fit straight on. | ||
| Barney Guzzo (Trinacria)
Junior Member Username: Trinacria Post Number: 236 Registered: 8-2002 |
The sticker looks like you only get one shot. It is too large to fit on just the inner lip. Is it supposed to be cut? I think I am missing something here. Does anyone have a picture to show how it goes on? Thanks in advance. (Ill have pictures up soon - car wheels are on!!!) | ||
| DJParks (Djparks)
Junior Member Username: Djparks Post Number: 236 Registered: 2-2003 |
Thanks Alan, What would I do without you guys? Now all I need is delivery of the wheels. DJ | ||
| Alan Leach (Speedy308)
New member Username: Speedy308 Post Number: 36 Registered: 12-2002 |
The Ferrari label goes at three o'clock with the valve stem at twelve (top), on Speedline and Chromodora, with the manufacture's brand at nine o'clock, opposite. On the Campagnolo wheels, the stickers are at two and ten o'clock locations, slightly closer to valve stem. Looks like your wheels most closely resemble the Chromodoras. Sticker is on inner flange. I'll have JRV post my research photos on this. Congrats guys! Lookin' sharp!!! | ||
| DJParks (Djparks)
Junior Member Username: Djparks Post Number: 232 Registered: 2-2003 |
As I recall, 'Ferrari' decals were to be provided with these wheels. Could somebody tell me the correct clocking in relation to the valve stem and surface for application? (extreme outer lip or inboard lip? Thank You, DJ | ||
| Steve Magnusson (91tr)
Intermediate Member Username: 91tr Post Number: 1790 Registered: 1-2001 |
Rob -- Can you please post a similar close-up shot of the rear 8" reproduction wheel -- TIA... | ||
| Tazio Nuvolari (Nuvolari)
Junior Member Username: Nuvolari Post Number: 211 Registered: 9-2002 |
Well after many delays the wheels are here and have been sent to the members of the group buy. I did keep a set for myself and here they are on my GTB.  | ||
| Ken A (Zff)
Junior Member Username: Zff Post Number: 56 Registered: 12-2002 |
Mark, Jeff, I also live in Hawaii and would be really interested in picking up a set too. Could Randall and I save on shipping if we did 8 wheels at once? ..and can you answer Randall's question about the 328 wheels fitting on a 308? Randall, maybe we should just find a 328 owner around here.  | ||
| Randall (Randall)
Member Username: Randall Post Number: 440 Registered: 1-2003 |
Any word yet on how the 328 wheels will fit on a 308? Is a a direct bolt on, or will modifications be req'd? | ||
| Randall (Randall)
Member Username: Randall Post Number: 417 Registered: 1-2003 |
$336 is do-able. I'd rather pick them up at the airport and save some money. It's not a far drive, but not much is. As soon as I know how the 328 wheels fit up to a 308 I can make a decision. | ||
| ARIE BONSELAAR (Arie)
New member Username: Arie Post Number: 44 Registered: 5-2001 |
Sounds like great news! our wheels are on there way! yee haw | ||
| Steve Magnusson (91tr)
Intermediate Member Username: 91tr Post Number: 1764 Registered: 1-2001 |
Jeff H. -- Per Dave H.'s comments -- take a 308 front hub with the 308 grease cap installed and see if this fits a 328 non-abs front wheel OK or not. | ||
| Tazio Nuvolari (Nuvolari)
Junior Member Username: Nuvolari Post Number: 203 Registered: 9-2002 |
Dan, I have left a message on your office voice mail outlining the information you requested. | ||
| Jeff Howe (Ferrari_uk)
Junior Member Username: Ferrari_uk Post Number: 248 Registered: 12-2002 |
Hi all. We are happy to measure our 328 wheels if that's what you need. Which measurements do you need ? Thanks. | ||
| Mark Langfield (Ferrari_co_uk)
New member Username: Ferrari_co_uk Post Number: 5 Registered: 4-2003 |
Hi Randall, The cost of shipping a set of wheels to Honolulu airport including insurance would be �210 (approx $336). To get a door to door quote I will need your full address so I will message you privately. Regards Mark | ||
| dan preston (Cobaltdan)
New member Username: Cobaltdan Post Number: 26 Registered: 12-2002 |
Rob, PLEASE RETURN MY PHONE CALL. Where are the wheels. At this point i do not think i am being unreasonable by requesting either the wheels or my money back. Sincerely, Dan Preston 718-923-1709 office | ||
| Terry Springer (Tspringer)
Member Username: Tspringer Post Number: 465 Registered: 4-2002 |
Robert did call me. I have to say IMHO he is staying on top of this and doing everything in his power to speed the process. It sounds like we should have the wheels within a couple of weeks, if so I am happy. The problems have clearly NOT been his fault. Terry | ||
| david handa (Davehanda)
Member Username: Davehanda Post Number: 688 Registered: 5-2001 |
The 328 wheel may require slight modification to fit on a 308. If I ever get off my ass, and remove a wheel, I will measure the hub centers on my 328 so we can compare. My recollection is that the 328 hubs had slighly smaller wheel bearing dust caps and so the 328 wheel must be milled out slightly to fit a 308. At least that is what I recall reading somewhere.... Jeff at FerrariUK sells both wheels...maybe he might measure them for you guys? :-) | ||
| Terry Springer (Tspringer)
Member Username: Tspringer Post Number: 464 Registered: 4-2002 |
Italian Design sells the set of 4 shocks and springs for $1,500.00. You choose your spring rates. They are very nice. | ||
| JPM (John_308qv)
Junior Member Username: John_308qv Post Number: 120 Registered: 4-2001 |
Terry, can you say how much $$$ for the Italian Design shocks/springs? John | ||
| dan preston (Cobaltdan)
New member Username: Cobaltdan Post Number: 25 Registered: 12-2002 |
before i sent rib a check i called proformance. they said they delt with him in the past and gave a quantity discount, they also said the rims were in stock. so where are our wheels....? rob please return my phone call and now this message with an up date and delivery date or return my money. sincerely, daniel preston | ||
| Terry Springer (Tspringer)
Member Username: Tspringer Post Number: 463 Registered: 4-2002 |
I have the Italian Design shocks/springs with the adjustable spring perchs and will be lowering the car slightly. I hate the way stock 308's have such a large gap between the top of the tire and the fender lip. Looks too much like a cheap Ford. Where the heck are these wheels?????? This is deep into the ridiculous stage at this point. If this thing is not coming together, lets either get the $$$ back or switch the entire deal to the Ferrari UK 328 wheels. I would probably rather have then anyway. | ||
| david handa (Davehanda)
Member Username: Davehanda Post Number: 684 Registered: 5-2001 |
Arie, 225-50-16 front and 245-45-16 rear work great and will not rub. Looks nice too from the rear. | ||
| ARIE BONSELAAR (Arie)
New member Username: Arie Post Number: 40 Registered: 5-2001 |
what is everyone going to use for tire/sizes? anyone thinking of lowering there 308? | ||
| Eric Eiland (Eric308gtsiqv)
Member Username: Eric308gtsiqv Post Number: 772 Registered: 11-2001 |
Robert Davis (H2oquick)...you have mail | ||
| Mark Langfield (Ferrari_co_uk)
New member Username: Ferrari_co_uk Post Number: 2 Registered: 4-2003 |
John and Randall, Thanks for the interest, Jeff is on holiday until Wednesday but I've asked our wharehouse guys to get a shipping estimate done, will post it as soon as I have it. Regards Mark | ||
| Randall (Randall)
Member Username: Randall Post Number: 367 Registered: 1-2003 |
Jeff- I'll be in the market for a set of wheels in the middle of next month. How do I find out a shipping estimate, can it be done on your site? My zip code is 96815 if not. Thanks for the help. | ||
| david handa (Davehanda)
Member Username: Davehanda Post Number: 666 Registered: 5-2001 |
Well, someone better jump on THAT deal. $2k for refinished QV wheels?! I paid $3k for the same deal 2 years ago. They don't come on the market that often.... | ||
| Robert Davis (H2oquick)
Junior Member Username: H2oquick Post Number: 230 Registered: 8-2001 |
I might have another set of 16" QV original wheels available soon, they are totally restored in like new condition. I think the going price will 1800.00 to 2000. I will let you know when I get them. | ||
| JPM (John_308qv)
Junior Member Username: John_308qv Post Number: 116 Registered: 4-2001 |
o.k., o.k., Rob shamed me into checking out the site. The top two amounts are for wheels with standard ofsets. $1004.38 for a set. The bottom two numbers are for ABS cars. $1969.46 for a set. Hmmmmmmmmmmmmmmmmmmmmmm indeed! Hey Jeff, how about an estimate for shipping a set to the colonies? | ||
| Terry Springer (Tspringer)
Member Username: Tspringer Post Number: 459 Registered: 4-2002 |
hmmmmmmmmmmmmmm why not just switch the entire group buy to the Ferrari UK 328 wheels? Would seem they would not only be cheaper, but be original Ferrari parts and actually be available rather than the perpetual "on order". | ||
| Rob Lay (Rob328gts)
Board Administrator Username: Rob328gts Post Number: 4598 Registered: 12-2000 |
try the website, you download some software and get on the owners site to view all the parts diagrams. Very simple to use and they give the serial number ranges for parts and prices. | ||
| JPM (John_308qv)
Junior Member Username: John_308qv Post Number: 115 Registered: 4-2001 |
Jeff, Which are ABS (deep offset)wheels and which are standard offset wheels? Thanks John | ||
| Robert W. Garven Jr. (Robertgarven)
Junior Member Username: Robertgarven Post Number: 132 Registered: 2-2002 |
Jeff, Do you have a phone number we could contact you at from the US? Could you post the same pictures of the 16" QV wheels? Rob | ||
| Jeff Howe (Ferrari_uk)
Junior Member Username: Ferrari_uk Post Number: 235 Registered: 12-2002 |
Hi all. Just to add clarification after reading this entire thread.... Our 328 roadwheels are priced thus... #125757 �150.15 - $238.92 #125925 �165.45 - $263.27 #137079 �448.10 - $713.03 #130905 �170.75 - $271.70 and all in stock. Hope this helps ! Regards.   | ||
| dan preston (Cobaltdan)
New member Username: Cobaltdan Post Number: 23 Registered: 12-2002 |
ok, sorry.... please update weekly via phone. thanks. | ||
| Eric Eiland (Eric308gtsiqv)
Member Username: Eric308gtsiqv Post Number: 767 Registered: 11-2001 |
Man, Robert...you have all the luck! Great to hear from you again . | ||
| stephen r chong (Ethans_dad)
Junior Member Username: Ethans_dad Post Number: 224 Registered: 3-2002 |
Dan, Don't worry about Rob. I assure you he's doing everything possible to get everyone their wheels as soon as possible. I had the pleasure to meet him this past Christmas with our fellow Toronto area FChat community. He was already talking about the possible group buy then, so this is certainly not a scam. | ||
| Robert Davis (H2oquick)
Junior Member Username: H2oquick Post Number: 228 Registered: 8-2001 |
I was going to get on that group buy, but instead got lucky and bought a set with a spare original (5) total including tires with less than 500 miles 16" original QV wheels with caps for a lot less than the ones offered in the group buy..... | ||
| Tazio Nuvolari (Nuvolari)
Junior Member Username: Nuvolari Post Number: 189 Registered: 9-2002 |
Paul, thank you for the vote of confidance and Dan, cool your jets. I spoke to you on the 17th 30 mins after your secretary called me and then called her again yesterday when she had not not been informed that I spoke to you last Thursday. I am calling England almost every day and making their lives impossible for this order to go through. Shy of flying down there and casting the wheels myself, this is the best I can do. I have always been taught that stealing is ok but if you are going to do it make it worth you while; don't look like a chump for peanuts. I am not about to mess up my reputation over a few thousand bucks. With that said I thank everyone for the confidance they have shown in me and hope to deliver very soon. | ||
| Newman (Newman)
Intermediate Member Username: Newman Post Number: 1195 Registered: 12-2001 |
Dan, I would relax, Im not in the buy but know Rob. He wont bone you. | ||
| Matt Morgan (Kermit)
Junior Member Username: Kermit Post Number: 127 Registered: 8-2001 |
Aluminum or Magnesium? I use an old weldors trick to tell. "Tinners Fluid" is a solution used in pre soldering cleanup, and is available in most hardware stores. A drop (preferably where it will not show) will tell you immediately. With Aluminum, there is no reaction at all. Magnesium will be "eaten" with bubbleing, turning dark, etc. | ||
| dan preston (Cobaltdan)
New member Username: Cobaltdan Post Number: 22 Registered: 12-2002 |
is anyone else getting concerned. cant get through to calasi and the wheels have not arrived? is this group wheel buy on the up and up or did we get taken? | ||
| dan preston (Cobaltdan)
New member Username: Cobaltdan Post Number: 21 Registered: 12-2002 |
where are our wheels? its been a while? | ||
| Rob Lay (Rob328gts)
Board Administrator Username: Rob328gts Post Number: 4363 Registered: 12-2000 |
Don't foget our other sponsors too, it's always worth shopping around... Sodacom, Nick's, and HG Parts. Robert (Tazio) isn't a FC sponsor, but he's a good guy and has many contacts and knows much. Thanks for the Cubans! | ||
| steve Lauren (Steve308gtsi)
New member Username: Steve308gtsi Post Number: 45 Registered: 5-2002 |
Rob I agree with you. I have had nothing but wonderful service and great prices from Ferrari UK(Jeff). On my last order for the coolant hoses that run under the intake, my local dealer was on a one month back order and Jeff had them at my door in a few days. When I need dealer parts I will only go to Ferrai UK from now on. | ||
| Rob Lay (Rob328gts)
Board Administrator Username: Rob328gts Post Number: 4361 Registered: 12-2000 |
What isn't clear about the Ferrari UK wheels. They are stock! Look at my profile and the original 328 wheels. 100% the same. | ||
| Randall (Randall)
Member Username: Randall Post Number: 295 Registered: 1-2003 |
Can someone post a close up pic of the Ferrari UK wheels? And do they bolt right on? | ||
| Rob Lay (Rob328gts)
Board Administrator Username: Rob328gts Post Number: 4359 Registered: 12-2000 |
That's what I mean. The Ferrari UK wheels are orginal new wheels 100% exact as stock for those prices. I've had several orders to Ferrari UK and Jeff with no problems. Just had two smaller orders for pads and misc pieces and they showed up at my door 3 days later Fed Ex. Most of the prices I've compared with Ferrari UK has them at least 25% cheaper and in this case maybe more than 50%. | ||
| Giang Hoang (Spidersense)
New member Username: Spidersense Post Number: 34 Registered: 10-2002 |
wait a sec. I missed this whole group buy thingy and reading the $230 for a 328 wheel got me all excited. Is this for real? are they original or reproductions? wheels for the 86-88 328 GTS/B ? sounds too good to be true. I always thought they were $700 each for used ones! is it too late to get in? wow. | ||
| Tazio Nuvolari (Nuvolari)
Junior Member Username: Nuvolari Post Number: 179 Registered: 9-2002 |
Arie, I know you are axious...we all are, I will give details THE MINUTE they are available. | ||
| ARIE BONSELAAR (Arie)
New member Username: Arie Post Number: 32 Registered: 5-2001 |
Anyone hear anything on there wheels? | ||
| Barney Guzzo (Trinacria)
Junior Member Username: Trinacria Post Number: 207 Registered: 8-2002 |
From Ferrari : "The size revision, combined with softer rubber compounds, helped achieve the overall improvements which benefit the car. The wheels were traditional Ferrari five-spoked stars shaped from cast alloy, tinted a dull brass color and, in cars with ABS, given convex centers." The wheels I refered to should be the 328 NON abs wheels. | ||
| Jim E (Jimpo1)
Intermediate Member Username: Jimpo1 Post Number: 1598 Registered: 7-2001 |
Stock 328 wheels are NOT magnesium. At least thats what the guy that repaired mine told me. He said he couldn't fix magnesium. He didn't blow up, so I guess my wheels are aluminum. | ||
| Russ Turner (Snj5)
Junior Member Username: Snj5 Post Number: 74 Registered: 2-2003 |
Just to state the obvious: Some 328 16" wheels were with ABS offsets ('concave', same as Mondial 3.2) and some with non-abs offsets ('convex or dished'). Just be sure what you are ordering. best to all rt | ||
| Barney Guzzo (Trinacria)
Junior Member Username: Trinacria Post Number: 206 Registered: 8-2002 |
That's a question I would like to know as well, but considering the price I would GUESS they are aluminum. | ||
| Terry Springer (Tspringer)
Member Username: Tspringer Post Number: 432 Registered: 4-2002 |
Im in on the group buy.... but if those 328 wheels really are that cheap and they are magnesium instead of aluminum, I may be trying get out! Particularly if the 328 wheels are available and not on back order... | ||
| Barney Guzzo (Trinacria)
Junior Member Username: Trinacria Post Number: 204 Registered: 8-2002 |
FWIW, I agree with Steve - the 308 QV wheels look the absolute best but are ridiculously priced (magnesium is expensive I guess??). The 328 bulges out slightly and doesn't quite look as nice. For $2300 I will put 360 wheels on my car. | ||
| Barney Guzzo (Trinacria)
Junior Member Username: Trinacria Post Number: 203 Registered: 8-2002 |
Steve The ones I quoted are the non-abs. I placed an order for them but didn't hear anything after repeated e-mails and a few months waiting for Jeff, I cancelled the order. Prior to my order, I asked Jeff about the composition of the wheels, the offsets, etc. and he replied that he had no idea and it was better to ask on Ferrarichat. | ||
| Rob Lay (Rob328gts)
Board Administrator Username: Rob328gts Post Number: 4327 Registered: 12-2000 |
Yes, for the 328, the orginal wheels from Ferrari UK are... 7 by 16 fronts: 150 Pounds 8 by 16 rears: 165 Pounds I haven't looked to see what the 308 wheels are, but these prices are amazing for OEM from an authorized Ferrari dealer. You'll find most of the Ferrari UK prices this good, I've bought pads, caps, and little interior pieces from them the past few weeks. Always shop around between our sponsors first. Doesn't take much additional effort and I think you'll be pleased. Ferrari UK has been entrusted by the Ferrari factory to be guardians of the marque for world-wide parts distribution for vehicles which have been out of production for ten or more years. Ferrari UK have the largest stock of parts in the world for these models and are in a unique position, being able to remanufacture Ferrari spare parts from the original drawings and specifications with the full authority of Ferrari SpA. http://www.ferrari.co.uk/classicparts/index.asp | ||
| Steve Magnusson (91tr)
Intermediate Member Username: 91tr Post Number: 1636 Registered: 1-2001 |
Nothing better than the 308QV 16" stock Magnesium alloy wheels - JMO. The 308QV 16" Reproductions are an Aluminum alloy (and have a simplified common 7" and 8" spoke configuration) so are less expensive (but heavier and less "tech"). $500 per wheel for a non-QV wheel (either 390mm or 14") is too much as they trade in the ~$1K/set used range (less if needing refinishing). I can't believe that price on the 328 wheels either, but if they're non-ABS 328 wheels I'd sure look into them if I was interested in upgrading a 308 from 390mm or 14". Can anyone confirm the material (Mag or Alum) for stock 328 non-ABS wheels and 328 ABS wheels? Did they switch to Alum on 328s? | ||
| DJParks (Djparks)
Junior Member Username: Djparks Post Number: 126 Registered: 2-2003 |
Thanks Barney, That answers it. DJ | ||
| DJParks (Djparks)
Junior Member Username: Djparks Post Number: 125 Registered: 2-2003 |
Now I'm really confused, Steve is quoting prices for #'s 120926/120927 QV 16" wheels (3,700 US) and Barney is quoting prices for #'s 125757/125925 16" QV wheels (920 US) with Tazio quoting 1350 US for repro's with no duties. Are we talking about the same wheels here? What are the differences or similarities? With shipping or without? DJ | ||
| Barney Guzzo (Trinacria)
Junior Member Username: Trinacria Post Number: 201 Registered: 8-2002 |
I really apologize here. I made a mistake. The $230 wheels are the 328 wheels. They still fit but they look different. | ||
| Randall (Randall)
Member Username: Randall Post Number: 273 Registered: 1-2003 |
The QV wheels are about the same aren't they? Is there anything negative about the QV wheels? How I hate shipping charges though. | ||
| Barney Guzzo (Trinacria)
Junior Member Username: Trinacria Post Number: 200 Registered: 8-2002 |
Yes it is but if you want the 308 wheel non QV it is like $500 each | ||
| Mike Procopio (Pupz308)
Member Username: Pupz308 Post Number: 276 Registered: 10-2002 |
That can't be right...? | ||
| Barney Guzzo (Trinacria)
Junior Member Username: Trinacria Post Number: 198 Registered: 8-2002 |
Steve 308 QV wheels 125757 ROAD WHEEL 7 X 16 2 �150.15 125925 ROAD WHEEL 8 X 16 2 �165.45 About $230 each | ||
| dan preston (Cobaltdan)
New member Username: Cobaltdan Post Number: 19 Registered: 12-2002 |
now that we have our wheels on the way. what is everyone choosing for tires? sincerely, dan<><> | ||
| Steve Magnusson (91tr)
Intermediate Member Username: 91tr Post Number: 1612 Registered: 1-2001 |
Rob -- Are you sure? I just checked the FerrariUK site, and it's 2,300 GBP (~$3,700) for a 120926/120927 308QV 16" set. | ||
| Randall (Randall)
Member Username: Randall Post Number: 257 Registered: 1-2003 |
I'd probably have to pay 2-300 for shipping..... sometimes being in Hawaii isn't that great. | ||
| Tazio Nuvolari (Nuvolari)
Junior Member Username: Nuvolari Post Number: 171 Registered: 9-2002 |
Rob the prices from Ferrari UK translate to over $2300 a set before shipping, duties or taxes. The group buy price was $1350 with no duties or taxes and no one paid more than $95 for shipping. | ||
| Rob Lay (Rob328gts)
Board Administrator Username: Rob328gts Post Number: 4263 Registered: 12-2000 |
If you want actual orginals for about the same price look at the prices our sponsor Ferrari UK has. I couldn't believe how good their prices were. | ||
| DJParks (Djparks)
Junior Member Username: Djparks Post Number: 115 Registered: 2-2003 |
Thanks Tazio, Looking forward to them. DJ | ||
| Tazio Nuvolari (Nuvolari)
Junior Member Username: Nuvolari Post Number: 169 Registered: 9-2002 |
Everyone got in on the group buy and we are waiting to hear from the supplier any day now as the wheels were backordered. All of the members of the group buy have behaved very well and I have ensured that there is no more than a 24hour turnaround time for each person's shippment to go out. A big thank you to all of the participants and we are almost there!!!!!! | ||
| Randall (Randall)
Member Username: Randall Post Number: 253 Registered: 1-2003 |
What ever happened to this? Who all got in on it and how did it go? Or has it happened yet? Thanks. |