| Author |
Message |
Philip Airey (Pma1010)
Junior Member
Username: Pma1010
Post Number: 192
Registered: 7-2002
| | Posted on Saturday, April 05, 2003 - 6:33 pm: | |
Greg
I did mine from underneath...awkward, but doable
Philip |
Erik R. K. Jonsson (Gamester)
Member
Username: Gamester
Post Number: 299
Registered: 11-2000
| | Posted on Saturday, April 05, 2003 - 1:15 pm: | |
Pull off the rubber trim seal. Drill the rivets and remove the spare tire surround. |
Greg Owens (Owens84qv)
Member
Username: Owens84qv
Post Number: 726
Registered: 10-2001
| | Posted on Saturday, April 05, 2003 - 9:30 am: | |
There are several threads on FC on the bushings themselves, but I haven't found and cannot figure out how to get the topside bolts and nuts removed to change the bushings. From the bottom is impossible, there is very little room from the side...is there a way to reach it from the top through the front bonnet?
Any help is appreciated. |