Author |
Message |
Mitchell Le (Yelcab1)
Member Username: Yelcab1
Post Number: 512 Registered: 11-2001
| Posted on Tuesday, April 08, 2003 - 9:45 am: | |
Made my own plug on a lathe from a small piece of aluminum. There is a trick to doing this so you should let a machine shop (or someone who has done this before) handle this.
|
Steve (Steve)
Member Username: Steve
Post Number: 342 Registered: 2-2001
| Posted on Monday, April 07, 2003 - 9:18 pm: | |
Tazio what type of distributor set up are you going with? |
Philip Airey (Pma1010)
Junior Member Username: Pma1010
Post Number: 196 Registered: 7-2002
| Posted on Monday, April 07, 2003 - 9:05 pm: | |
Tazio I had a machine shop plug mine. Ferrari did a retrofit or mod for the 79s as I recall. Philip |
Tazio Nuvolari (Nuvolari)
Junior Member Username: Nuvolari
Post Number: 174 Registered: 9-2002
| Posted on Monday, April 07, 2003 - 6:04 pm: | |
I am insalling a single electronic distributor on my 77 GTB and discovered that the cam on the bank of cylinders that will be left without a distributor does not have an its internal oil plug as used in the single distributor setups. Can someone tell me where to get this plug and outline what is involved in installing it. Thanks in advance. |