| Author |
Message |
Ken Ghiringhelli (Kenny94945)
New member
Username: Kenny94945
Post Number: 40
Registered: 12-2002
| | Posted on Tuesday, April 08, 2003 - 12:14 pm: | |
Luigi...I concur with Bruce. |
Ben Lobenstein 90 TR (Benjet)
Intermediate Member
Username: Benjet
Post Number: 1088
Registered: 1-2001
| | Posted on Tuesday, April 08, 2003 - 11:57 am: | |
I actually removed the factory front plate (& holder) on my TR (ahem, only to clean the area behind it), basically there were a set of 4 "L" brackets with assorted hardware/fasteners that were mounted onto the car by holes in the front grill. Once removed it was not noticable that one ever belonged there, check to see that all your front grill doesn't have these holes (they are NOT directly visible), you have to run your fingers along the grill slats to find them.
HTH
-Ben |
James Selevan (Jselevan)
Member
Username: Jselevan
Post Number: 477
Registered: 6-2002
| | Posted on Tuesday, April 08, 2003 - 11:40 am: | |
The tow eyebolt should be in your tool kit (jack/tire change kit).
Jim S. |
Luigi Nicoletti (2mmuch)
New member
Username: 2mmuch
Post Number: 45
Registered: 9-2002
| | Posted on Tuesday, April 08, 2003 - 11:14 am: | |
Does anyone no the thread size of the tow eye screw? I know the car looks great with out the plate, but its not fun when your in a Ferrari pulled over on the side of the road just because your missing your front plate. |
James Glickenhaus (Napolis)
Member
Username: Napolis
Post Number: 929
Registered: 10-2002
| | Posted on Tuesday, April 08, 2003 - 9:21 am: | |
Hole covers tow eye screw in point. |
Bruce Wellington (Bws88tr)
Intermediate Member
Username: Bws88tr
Post Number: 1833
Registered: 4-2002
| | Posted on Tuesday, April 08, 2003 - 9:10 am: | |
DONT DO IT...I LIVE IN NJ AND THERES NO HOLE FOR IT. ON MY TR .I HAVE BEEN STOPPED 2X, AND EVERY TIME I TELL THE COP, THE FRAME HAD TO BE SPECIALLY
ORDERED FROM ITALY, AND IT HASNT ARRIVED YET..BUT DO KEEP THE EXTRA PLATE IN THE BACK BEHIND THE SEATS..
REGARDS,
BRUCE |
Luigi Nicoletti (2mmuch)
New member
Username: 2mmuch
Post Number: 44
Registered: 9-2002
| | Posted on Tuesday, April 08, 2003 - 8:59 am: | |
I live in Canada and I'm being told I have to have my front plate on my TR. I was thinking of making a bracket to thread into the hole in the front spoiler. Does anyone know the thread size? Does anyone know what this hole was used for? |