Author |
Message |
Verell Boaen (Verell)
Member Username: Verell
Post Number: 634 Registered: 5-2001
| Posted on Friday, April 11, 2003 - 2:22 pm: | |
Look in the $4.95 & $8.95 bargain bins at your local auto parts store! The 'All Pro' and 'Robbins' parts stores around here usually have a blister packed set of 3 sizes of 1/2" drive allen wrenches, one of the 3 sizes is the 14mm Think the bins are labled something like 'Tool Zone'. I think I've seen the same bins at Pep Boys. The parts seem to be well machined & do the job nicely. Think they're in the $4.99 bin, but can't remember fer sure. Anyway, you can't beat the price. 'Gards
|
Jeff B. (Miltonian)
Junior Member Username: Miltonian
Post Number: 224 Registered: 12-2002
| Posted on Friday, April 11, 2003 - 10:26 am: | |
Listed in McMaster-Carr for $9.35, Grainger for $12.53, not hard to locate at a reasonable cost. |
Rob Schermerhorn (Rexrcr)
Member Username: Rexrcr
Post Number: 490 Registered: 11-2002
| Posted on Friday, April 11, 2003 - 10:11 am: | |
NAPA auto parts stores usually have good tool inventories, too. Reasonable cost. |
TomD (Tifosi)
Advanced Member Username: Tifosi
Post Number: 3213 Registered: 9-2001
| Posted on Friday, April 11, 2003 - 9:34 am: | |
you should be able to get that socket at a pep boys - that size may need to special order though |
Mitchell Le (Yelcab1)
Member Username: Yelcab1
Post Number: 515 Registered: 11-2001
| Posted on Friday, April 11, 2003 - 9:33 am: | |
Do you mean a 14mm allen socket for your 1/2 inch ratchet? If so, I send you a short piece of 14mm allen wrench, cut a small piece off, epoxy it in a 14mm socket, and you got yourself a $65 tool. |
BILL CHIUSANO (My355)
Junior Member Username: My355
Post Number: 55 Registered: 3-2003
| Posted on Thursday, April 10, 2003 - 10:36 pm: | |
THE OIL CHANGE IS NOW COMPLETE!! YEAAAA!! THE ONE USED TO PULL THE DRAIN PLUG ON THE 99'355. I STILL NEED A 1/2 X 14MM ALLEN WRENCH ADAPTOR OF MY OWN ANY IDEAS OTHER THAN "SNAP-ONS" 65 DOLLAR ONE??? |