| Author |
Message |
Bob Campen (Bob308gts)
Member
Username: Bob308gts
Post Number: 512
Registered: 9-2001
| | Posted on Wednesday, April 16, 2003 - 6:24 pm: | |
For the arms the straight one goes on the pass. side, the one with a bend at the end is drivers side.There is a large nut that attaches the the linkage to the car, this goes on the cowl, the smaller nut attaches the arm to the drive. Hope this helps |
Randall (Randall)
Member
Username: Randall
Post Number: 314
Registered: 1-2003
| | Posted on Wednesday, April 16, 2003 - 3:33 pm: | |
The two wiper arms are different. Which goes where? Where the wiper arm attaches at the base of the windshield, is that hex nut on top or inside? |
Randall (Randall)
Member
Username: Randall
Post Number: 306
Registered: 1-2003
| | Posted on Tuesday, April 15, 2003 - 7:26 pm: | |
I'm install the entire wiper assembly (arms, motor, linkages, blades) and am not sure how it aligns with the bottom of the windshield. It wasn't installed when I bought the car, so I don't have any idea how it was stuck up in the before. If anyone could post some pictures of that area and around the motor I'd really appreciate it. Thanks for the help. |
|