| Author |
Message |
Jeff B. (Miltonian)
Junior Member
Username: Miltonian
Post Number: 240
Registered: 12-2002
| | Posted on Friday, April 18, 2003 - 9:59 pm: | |
Since the 40DCZ was used on the Lancia Aurelia, have you tried Omicron Engineering in England for parts or advice? Try www.omicron.uk.com |
Mike Daniska (Prveqty)
New member
Username: Prveqty
Post Number: 4
Registered: 4-2003
| | Posted on Friday, April 18, 2003 - 7:35 am: | |
Carbs Unlimited is good, but only offers what is currently available. These items are long obsolete and as such would have to come from either old stock or be used items that someone would have around from having worked on the carbs over the years. |
Bruno (Originalsinner)
Intermediate Member
Username: Originalsinner
Post Number: 1068
Registered: 5-2002
| | Posted on Friday, April 18, 2003 - 7:29 am: | |
carbs unlimited is good. I dont know if they got the banjo's. last time i needed one I had to go through dealer. Wasnt that expensive. |
Mike Daniska (Prveqty)
New member
Username: Prveqty
Post Number: 3
Registered: 4-2003
| | Posted on Thursday, April 17, 2003 - 11:24 am: | |
Jeff - Just sent you an email with descriptions. Mike |
Jeff Howe (Ferrari_uk)
Junior Member
Username: Ferrari_uk
Post Number: 222
Registered: 12-2002
| | Posted on Thursday, April 17, 2003 - 9:45 am: | |
Prveqty - Give me a carb ID number and car model and year etc and I can look. We do keep some carb stuff.
JH |
"The Don" (Mlemus)
Advanced Member
Username: Mlemus
Post Number: 3823
Registered: 8-2002
| | Posted on Thursday, April 17, 2003 - 7:54 am: | |
http://carbsunlimited.com/ |
Mike Daniska (Prveqty)
New member
Username: Prveqty
Post Number: 2
Registered: 4-2003
| | Posted on Thursday, April 17, 2003 - 7:05 am: | |
Tried them already, no go. Thanks |
Tom Jones (Ferrarioldman)
Junior Member
Username: Ferrarioldman
Post Number: 101
Registered: 6-2002
| | Posted on Wednesday, April 16, 2003 - 8:14 pm: | |
Try www.piercemanifolds.com |
Mike Daniska (Prveqty)
New member
Username: Prveqty
Post Number: 1
Registered: 4-2003
| | Posted on Wednesday, April 16, 2003 - 6:42 pm: | |
I need some fuel inlet banjo bolts and all-brass screens that go around them (not the replacement plastic end ones). I'm quite sure they're not reproduced, does anyone have spare carburetors/parts around or know someone who does? Thanks, Mike |