| Author |
Message |
lou staller (Lou_staller)
New member
Username: Lou_staller
Post Number: 24
Registered: 12-2002
| | Posted on Monday, April 21, 2003 - 8:59 pm: | |
Easy as pie. Simply remove the door panel, have the window in the up position, locate the small diameter cable that runs from the door handle to the door latch, loosen the little locking screw, pull on the cable to tighten it, tighten the screw, reinstall the door panel and your set! It's that easy.
If it's the inside handle there's a rod that can also be adjusted while you have the door panel off. |
Peter Sedlak (Peters)
Junior Member
Username: Peters
Post Number: 211
Registered: 1-2003
| | Posted on Monday, April 21, 2003 - 10:41 am: | |
Kewl!!! I will try it! |
Tom Bakowsky (Tbakowsky)
Member
Username: Tbakowsky
Post Number: 338
Registered: 9-2002
| | Posted on Sunday, April 20, 2003 - 10:24 pm: | |
Try to retension the cable that attaches to the door handle. I had wiggle aswell and that did the trick. |
Peter Sedlak (Peters)
Junior Member
Username: Peters
Post Number: 202
Registered: 1-2003
| | Posted on Sunday, April 20, 2003 - 10:20 pm: | |
Both door handles of my '77 308 wiggle a bit. I tried to tighten the screw inside the door jam, but it does not budge. Any suggestions? |