| Author |
Message |
Verell Boaen (Verell)
Member
Username: Verell
Post Number: 665
Registered: 5-2001
| | Posted on Monday, April 28, 2003 - 3:20 pm: | |
Steven,
It's Hatch & Sons:
www.hatchandsons.com
Hatch & Sons Automotive Inc
533 Boston Post Road, Wayland, MA 01778
(508) 358-3500 |
Verell Boaen (Verell)
Member
Username: Verell
Post Number: 663
Registered: 5-2001
| | Posted on Monday, April 28, 2003 - 3:12 pm: | |
Steven, You're welcome.
I got the part#s from my catalogs & checked Ferrari.UK pricing. I don't want to pay 85 pounds for the plenum. That's why I'm asking about a used one here. There's gotta be some out there. |
Steven R. Rochlin (Enjoythemusic)
Member
Username: Enjoythemusic
Post Number: 385
Registered: 4-2002
| | Posted on Monday, April 28, 2003 - 8:56 am: | |
Verell,
MANY thanks for your assistance this weekend. Your help is TRULY appreciated and hope all those lights/assembly help you. You could get a new one from Ferrari UK from the owners.ferrari.com website . If you want, i can easily add it to one of my many orders with them and then bring it by. BTW, can not find Hutch & Son ph number as i want to get the rear end aligned ASAP with new tires. MANY MANY MANY thanks.
Enjoy the Drive,
Steven R. Rochlin
|
Verell Boaen (Verell)
Member
Username: Verell
Post Number: 661
Registered: 5-2001
| | Posted on Monday, April 28, 2003 - 8:13 am: | |
Still looking.....
I'd also consider taking a rebuildable alternator with the plenum attached if the price were right.
As long as the stator winding is OK, it's probably rebuildable. |
Verell Boaen (Verell)
Member
Username: Verell
Post Number: 653
Registered: 5-2001
| | Posted on Saturday, April 26, 2003 - 12:43 pm: | |
BTW, looked up the part#s:
Plenum (called a 'conveyer') #: 121837
The following would be nice to have, but could make up my own:
Tube #: 121190
Clip #: 121839
Clamp #: 12180090
|
Verell Boaen (Verell)
Member
Username: Verell
Post Number: 652
Registered: 5-2001
| | Posted on Saturday, April 26, 2003 - 12:23 pm: | |
Does anyone have a spare alternator air intake plenum, preferably with the duct, that they'd like to sell? I believe that 328s & the last run of 308QVs used them. Possibly 348s also.
I'm assuming the plenum's made for a BOSCH alternator, but I should be able to adapt one made for a DELCO alternator if necessary
I thought I'd ask the F*Chat before I started calling the various places that part out 3x8s.
I was looking at Steven Rochelin's '85 308 QV & noticed that the back of his alternator was completely enclosed with a metal plenum with a orange duct running down beside the engine mount.
I really like this setup much better than the flat plate on standoff brackets that's on the back of my '82 QV's BOSCH alternator. .
For one thing any oil that drops down does NOT get sucked into the alternator. For another, the duct pulls in air that hasn't been pre-heated by the exhaust manifold & engine!
|