308 QV loss of power from 4000 RPM / ... Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A Archives » Archive through May 09, 2003 » 308 QV loss of power from 4000 RPM / SOLVED « Previous Next »

Author Message
Dave328GTB (Hardtop)
Member
Username: Hardtop

Post Number: 529
Registered: 1-2002
Posted on Saturday, May 03, 2003 - 7:23 pm:   

Ben,
You have discovered one reason Euros sell for less. Good luck finding a stock unit. Check with Ferrari junk yards, etc. New ones are no longer produced. If you don't care about keeping it stock, I would look into aftermarket systems. Nick's (a Fchat sponser) offers a system.

Dave
Ben Mayron (Benmayron)
New member
Username: Benmayron

Post Number: 9
Registered: 2-2003
Posted on Saturday, May 03, 2003 - 3:03 pm:   

I don't know if 803 and 805 are the same unit .
My 308 83 QV is an euro version without lambda sensor.
Did you know another cheaper electronic ignition for adapt on this car ? Crane systeme?
Somebody has already make this system ?
It's hard to keep my car in the garage...
Thanks for your help.
Ken Ross (Kdross)
Member
Username: Kdross

Post Number: 328
Registered: 2-2002
Posted on Wednesday, April 30, 2003 - 6:46 am:   

Ben:

I have two Digiplex's (805 A) for the 308QV. If they will work for you I would be willing to sell them.

Ken
[email protected]
Ben Mayron (Benmayron)
New member
Username: Benmayron

Post Number: 8
Registered: 2-2003
Posted on Wednesday, April 30, 2003 - 4:46 am:   

The problem was on the ignition module and not to the fuel pressure. When i swapp the unit the problem go from the rear bank to the front bank.
Where i can find one cheaper ?
It's an Magneti Marelli Digiplex MED 803 A
Thanks a lot to all for your help

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration