| Author |
Message |
Ben Millermon (Brainsboy)
Member
Username: Brainsboy
Post Number: 290
Registered: 5-2001
| | Posted on Friday, May 02, 2003 - 9:18 am: | |
The guts should come out as one unit, there should a clip holding it in. then flip the unit 180' and insert it so the square piece being the drive now points to the other side, then reinstall the clip. |
Mitch Alsup (Mitch_alsup)
Member
Username: Mitch_alsup
Post Number: 601
Registered: 4-2002
| | Posted on Thursday, May 01, 2003 - 10:36 pm: | |
My TQ wrench is bidirectional. |
Verell Boaen (Verell)
Member
Username: Verell
Post Number: 689
Registered: 5-2001
| | Posted on Thursday, May 01, 2003 - 9:15 pm: | |
Sounds like your wrench has a ratchet drive mechanism that reverses direction by popping out and being replaced after reversing top & bottom of the pop-out mechanism |
Bill Steele (Glassman)
Junior Member
Username: Glassman
Post Number: 207
Registered: 4-2002
| | Posted on Thursday, May 01, 2003 - 9:10 pm: | |
We are talking about a torque wrench. |
Bruno (Originalsinner)
Intermediate Member
Username: Originalsinner
Post Number: 1085
Registered: 5-2002
| | Posted on Thursday, May 01, 2003 - 9:00 pm: | |
R we talking with a tourqe wrench or a ratchet? |
Bill Steele (Glassman)
Junior Member
Username: Glassman
Post Number: 204
Registered: 4-2002
| | Posted on Thursday, May 01, 2003 - 7:47 pm: | |
How do you torque a left hand nut? My wrench instructions say's to remove the ratchet wheel and insert it so the drive plug comes out on top! What the hell does that mean? |