Author |
Message |
Tom Jones (Ferrarioldman)
Junior Member Username: Ferrarioldman
Post Number: 116 Registered: 6-2002
| Posted on Tuesday, May 06, 2003 - 4:22 pm: | |
NAPA # is 207165 |
Kelly (Tifosi1)
Member Username: Tifosi1
Post Number: 610 Registered: 2-2002
| Posted on Monday, May 05, 2003 - 8:34 am: | |
NAPA sells the compressor, they should have the o ring. Kelly |
Donny Bridges (Wildcatfans)
Junior Member Username: Wildcatfans
Post Number: 119 Registered: 9-2001
| Posted on Sunday, May 04, 2003 - 3:27 pm: | |
My A/C started off this year by not working. I looked around and found that the high side hose was only hand tight on the compressor. I changed the dryer and am ready to reattach the high side hose but wanted to change the O-Ring that sits in the grove on a Aspera compressor first (it looked a little rough). Here are some photos if I wasn't clear (pictures aren't too clear either):
Where can I find one of these or is this a Ferrari only part? Also, should I change out all the o-rings in the system while it's refrigerantless? Thanks |