| Author |
Message |
Joe Calareso (308fun)
| | Posted on Friday, August 31, 2001 - 2:50 pm: | |
Anyone know a good source for black braided vacuum lines ? Need to replace the long section (about 3 feet) that runs off the right side of the air intake plenum, around the back of the manifold and connects to a valve unit under the expansion reservoir on ther left side of the engine compartment (84 308 gtsi qv). Inside diameter looks to be 17mm with the wall thickness about 1/8". It's a heavy duty line. Dealer came up with right size diameter but sidewall is paper thin and won't hold up to heat from engine. |
|