Removing trim pieces on 1979 308 GTS Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A Archives » Archive - May thru December 2001 » Removing trim pieces on 1979 308 GTS « Previous Next »

Author Message
Jerry Wiersma (Tork1966)
Posted on Monday, September 03, 2001 - 7:18 pm:   

Thanks for the link guys. After reading the heartbreaking news that I would have to (among other things) remove the side louvers that I just put back on yesterday after repainting them, I will wait until winter. Thanks Jerry.
'75 308 GT4 (Peter)
Posted on Monday, September 03, 2001 - 1:37 pm:   

Ferrari 308 FAQ:

http://home.att.net/~ferrari/index.htm
Joe Calareso (308fun)
Posted on Monday, September 03, 2001 - 11:29 am:   

Jerry,
There's step by step instructions on this. Isn't the easiest task because you have to drill out rivets, remove bolts behind engine and remove vent windows which are a pain in butt to put back in. Locate 308 FAQ on web and you'll see the instructions.
joe c
Jerry Wiersma (Tork1966)
Posted on Sunday, September 02, 2001 - 5:12 pm:   

Can anyone shed some light on how to get the vinyl covered rear panel out that lays horizontally behind my seats (in front of and below the rear window.) Also the two vinyl covered pieces on either side that run vertically up from the ends of the aforementioned piece. This is on a 1979 308 GTS. Thanks, Jerry.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration