| Author |
Message |
Stephen E. Schroeder (Seschroeder)
New member
Username: Seschroeder
Post Number: 48
Registered: 4-2002
| | Posted on Wednesday, May 21, 2003 - 9:41 pm: | |
Actually I was speaking of the rather large piece on the roof.
Steve Schroeder |
Eric Eiland (Eric308gtsiqv)
Member
Username: Eric308gtsiqv
Post Number: 833
Registered: 11-2001
| | Posted on Wednesday, May 21, 2003 - 8:10 pm: | |
Stephen...I could be mistaken here, but I was under the impression that the rear window / metal shield (in engine compartment) had to be removed in order to unfasten the rear shelf for removal. There has been past discussions about this procedure...might do a quick search in the archives. |
Stephen E. Schroeder (Seschroeder)
New member
Username: Seschroeder
Post Number: 47
Registered: 4-2002
| | Posted on Wednesday, May 21, 2003 - 8:01 pm: | |
I will understand if no one replies. Apparently I am not capable of the "Queen's English". "How does you" - well, don't I feel the fool.
Steve Schroeder |
Stephen E. Schroeder (Seschroeder)
New member
Username: Seschroeder
Post Number: 46
Registered: 4-2002
| | Posted on Wednesday, May 21, 2003 - 7:58 pm: | |
Gentlemen:
I'm well on the way to finishing up the interior of my 308 GTSi. Actually all that is left is the area behind the seats, rear shelf if you will. How does you remove the upper piece. I understand the metal "catches" for the top must be removed but what then?
Thanks in advance
Steve Schroeder |