| Author |
Message |
JRV (Jrvall)
Intermediate Member
Username: Jrvall
Post Number: 1538
Registered: 11-2002
| | Posted on Friday, May 23, 2003 - 5:22 am: | |
Hi,
that Metal Washer is the top of the injector holding cup that holds the injector and large rubber seal. That holder screws into the intake manifold, unscrew using the injector as the nut. Then push the injector out, replace the rubber seal, reinstal. |
Dirk Rabenschwanz (Dirk)
Junior Member
Username: Dirk
Post Number: 52
Registered: 4-2001
| | Posted on Friday, May 23, 2003 - 5:10 am: | |
Hello,
how can i renmove the injectors on my 84QV.
It seems, that there are metal washers on the top, which holds the injectors down.
Are these washers screwed in the manifold ?Normally the K-jetronic injectors are hold only by a circlip.
Thanks
Dirk
|
|