| Author |
Message |
Verell Boaen (Verell)
Member
Username: Verell
Post Number: 789
Registered: 5-2001
| | Posted on Monday, May 26, 2003 - 11:09 pm: | |
Steven,
There is a trick to it. I remember seeing it written up somewhere a couple of years ago. Unfortunately I can't remember where. I've poked around the usual set of on-line resources w/o stumbling onto it. I'm beginning to think that it must have been a FerrariList eMAIL. Might try searching their archives.
Vaguely recall that you slip the window gasket onto the glass, then tie a piece of heavy cord tightly in the slot the body fits into. This keeps the glass in place while you work the gasket into the body. Be very careful to not put much force on the glass in the process.
Hope this helps. |
Stephen E. Schroeder (Seschroeder)
New member
Username: Seschroeder
Post Number: 49
Registered: 4-2002
| | Posted on Monday, May 26, 2003 - 7:38 pm: | |
Well, I,ve almost completed the interior redo. Seats. console and door panels done and installed. Rear shelf panels done and installed. Now I have to install the 1/4 windows, they certainly came out easily enough. Any tricks to doing this? Looks a wee bit tricky.
As always, thanks in advance.
Steve Schroeder |
|