| Author |
Message |
Dennis (Bighead)
Junior Member
Username: Bighead
Post Number: 109
Registered: 2-2003
| | Posted on Wednesday, May 28, 2003 - 9:50 pm: | |
As David pointed out, there are two jack points. The one by the b-pillar (vertically, almost directly under the door release handle), can be used to jack up the entire side of the car, to do both wheels at once, if needed.
vty,
--Dennis |
David Moore (Speedmoore)
New member
Username: Speedmoore
Post Number: 49
Registered: 4-2003
| | Posted on Wednesday, May 28, 2003 - 9:34 pm: | |
Look along the rockers. There is a square looking metal support area of about 1.5 x 1.5 inches. One is by the B-pillar the other is by the A-pillar on ea side of the car. I use a piece of a 2x4 between those points and jackstands or lift arms to support the car. |
Michael Calvo (Capt)
New member
Username: Capt
Post Number: 1
Registered: 5-2003
| | Posted on Wednesday, May 28, 2003 - 4:18 pm: | |
Folks,
I took a quick scan through my owners manual and didn't see anything on the correct places to jack a 355 up from. Are there specific points where a 355 should be the jack should be places? If so can someone share them or point to where they are in the manual?
Thanks,
Michael
|
|