| Author |
Message |
Skip Stocknick (Banshee74)
New member
Username: Banshee74
Post Number: 7
Registered: 3-2001
| | Posted on Sunday, June 01, 2003 - 5:52 pm: | |
I apologize! It's an '83 308 QV. (I sent the same email to a friend with the same car, and hadn't included the year) |
david handa (Davehanda)
Member
Username: Davehanda
Post Number: 866
Registered: 5-2001
| | Posted on Sunday, June 01, 2003 - 2:48 pm: | |
Check the archives, then come back and give more information on your year/model of 308. |
Skip Stocknick (Banshee74)
New member
Username: Banshee74
Post Number: 6
Registered: 3-2001
| | Posted on Sunday, June 01, 2003 - 2:40 pm: | |
The mat was the first thing I checked.
Skip |
david handa (Davehanda)
Member
Username: Davehanda
Post Number: 864
Registered: 5-2001
| | Posted on Sunday, June 01, 2003 - 2:33 pm: | |
Check that the floor mat is not slipping forward.
Also check the archives for other possible solutions, as this is posted at least once per month.... |
Skip Stocknick (Banshee74)
New member
Username: Banshee74
Post Number: 5
Registered: 3-2001
| | Posted on Sunday, June 01, 2003 - 2:31 pm: | |
My 308 warms up fine, idles at 1050. (light out)
Then after running for a while the RPM creeps up to about 2250 and stays there. Any suggestions?
Skip |