| Author | Message | ||
| randy g (Ragilber)
New member Username: Ragilber Post Number: 4 Registered: 5-2003 |
if you want a set of great looking TR Wheels, I am selling mine for $1000.00 Drop me a e-mail if interested. Randy [email protected] | ||
| Doug meredith (Dougm)
Member Username: Dougm Post Number: 309 Registered: 2-2001 |
I think the problem would be more with the offsets, not the splines. I was hoping someone had already tried an install. | ||
| Steve Magnusson (91tr)
Intermediate Member Username: 91tr Post Number: 1844 Registered: 1-2001 |
Doug -- We still can't seem to figure out if a 328 non-abs wheel fits a 308 as-is or not, and you're asking a much harder question  . Maybe you could deduce "no" fairly quickly if you just compared the number of splines and/or spline pitch diameter on each (i.e., if # of splines and/or pitch diameters are different it probably won't be an easy swap -- if it's the same # then keep digging) so post your spline count (and maybe a single-lug TR Owner could do the same by looking at their spare). I can't recall if there's a decent cross-section of the wheel/hub for the single-lug TRs shown in the TR WSM, but I'll have a look and post if there is. | ||
| Doug meredith (Dougm)
Member Username: Dougm Post Number: 308 Registered: 2-2001 |
anyone? | ||
| Paul Bianco (Paulie_b)
Junior Member Username: Paulie_b Post Number: 238 Registered: 1-2003 |
good question. try to email [email protected] to ask. | ||
| Doug meredith (Dougm)
Member Username: Dougm Post Number: 307 Registered: 2-2001 |
I know it's probably been asked before, but will the 16" wheels from a TR with the center spline fit on a Boxer? |