Author |
Message |
Kurt Kjelgaard (Kurtk328)
Junior Member Username: Kurtk328
Post Number: 203 Registered: 3-2001
| Posted on Tuesday, June 10, 2003 - 6:59 am: | |
Keep us posted - I suspect that the switch assemblies are not quite interchangeable - they do have different part numbers. Interesting though if they are identical - maybe its the only colored dot on the switches which give them different numbers. |
JRV (Jrvall)
Intermediate Member Username: Jrvall
Post Number: 1699 Registered: 11-2002
| Posted on Saturday, June 07, 2003 - 11:16 am: | |
There are many things it could be, easiest way to chech switches when there are duals is to pull both switches and plug the working switch into the side not working, it the good switch works in either location...other switch is bad, if it doesn't work when swapped it's a fuse or wiring issue. |
Crawford White (Crawford)
Junior Member Username: Crawford
Post Number: 65 Registered: 3-2003
| Posted on Friday, June 06, 2003 - 12:10 pm: | |
It's actually not the heater LED, but the vent direction LED on the drivers side. I can't get any 'blips' to appear. I checked the archives, and took out the switch and sprayed some contact cleaner on it, but that didn't work... My other controls all work fine - just the one LED is not functioning and the fan vent does not adjust. I recently cleaned my leather; that may have something to do with the problem. Thanks in advance |