| Author |
Message |
Paul (Pcelenta)
Member
Username: Pcelenta
Post Number: 345
Registered: 7-2002
| | Posted on Tuesday, June 10, 2003 - 6:59 am: | |
Hans, you have the same ones I have on my 78 gts..allison...I do have the original install instructions somewhere and will dig them up to post...I did find the lifetime warranty..wonder if crane would honor it?
|
billy bob (Fatbillybob)
Member
Username: Fatbillybob
Post Number: 284
Registered: 8-2002
| | Posted on Monday, June 09, 2003 - 10:42 pm: | |
Matt,
I'm too dumb to scan my wiring diagram for the xr-700. I'm 90% sure I still have them. Got a fax #? And I never used the ballast resitors with that setup |
Hans E. Hansen (4re_gt4)
Intermediate Member
Username: 4re_gt4
Post Number: 1463
Registered: 4-2002
| | Posted on Monday, June 09, 2003 - 5:32 pm: | |
Curious.
My xr700s are ancient, before Crane took them over - they were sold as Alyson (sp?). 10+ years old. I've got the original F-coils, but I don't have a clue as to whether or not I've got coil resistors in the circuit.
My ignition boxes are mounted to a fabricated bracket under the coils, under the left rear fender. They get plenty of air circulation, and are away from the heat of the engine and exhaust. Maybe that helps. |
"The Don" (Mlemus)
Senior Member
Username: Mlemus
Post Number: 5193
Registered: 8-2002
| | Posted on Monday, June 09, 2003 - 3:50 pm: | |
I am upgrading to the xr3000 and the crane ps60 coils. I spent FOREVER on the phone with them |
Hans E. Hansen (4re_gt4)
Intermediate Member
Username: 4re_gt4
Post Number: 1460
Registered: 4-2002
| | Posted on Monday, June 09, 2003 - 3:18 pm: | |
Matt: Just saw this post. Do you have it fixed, or do you still need this info? |
"The Don" (Mlemus)
Senior Member
Username: Mlemus
Post Number: 5163
Registered: 8-2002
| | Posted on Saturday, June 07, 2003 - 7:23 am: | |
Can someone please post a picture and wiring diagram of your Crane xr700 setup?
Or please e-mail it to [email protected]
Thanks |