| Author |
Message |
Steve Magnusson (91tr)
Intermediate Member
Username: 91tr
Post Number: 1864
Registered: 1-2001
| | Posted on Thursday, June 12, 2003 - 9:25 am: | |
Anthony -- When I saw your first post I cringed a little since this has been a difficult issue here before (and TRs seem to use a lot of different sizes/PNs). My advice is that you need to know yourself the ODs of the bushings (OD = the part of the bushing that fits into the A-arm) and the lengths of the bushings so that you can double-check/confirm this with any potential supplier. Do a search on "348 bushing" (AND mode) and you should get a lot of relevant previous threads.
Energy Suspensions has two sizes of Polyurethane A-arm bushings available:
30 mm OD X ? length that fit 308s (can someone please confirm the length of a stock 308 30 mm OD bushing?)
and
34 mm OD x 56 mm length (although others have reported these can be "trimmed" by a Machine Shop to 34 mm OD x 49 mm length if needed).
SuperformanceUK also lists some "harder" bushings for various models, but don't give any dimensions (or material info).
Good luck (and please post the TR sizes/quantities if you measure them)... |
Anthony Millman (Frari)
New member
Username: Frari
Post Number: 7
Registered: 6-2003
| | Posted on Thursday, June 12, 2003 - 12:22 am: | |
Someone out there must have some good info on TR suspension bushes that they can share with me. I am happy to buy from U.S.A as original factory bushes cost an arm and a leg. Any suggestions. |
Anthony Millman (Frari)
New member
Username: Frari
Post Number: 1
Registered: 6-2003
| | Posted on Monday, June 09, 2003 - 9:26 pm: | |
Hello this is my first post. i enjoy the Ferrari chat immensely and have been reading avidly for many weeks now. I know that i have seen some info regarding suspension bushes somewhere in these pages. can someone put me on the right track as i wish to purchase a complete set front and rear of the correct size bushes as mine are showing signs of age. |