| Author |
Message |
Steve Magnusson (91tr)
Intermediate Member
Username: 91tr
Post Number: 1861
Registered: 1-2001
| | Posted on Wednesday, June 11, 2003 - 9:40 am: | |
F made carbed GTBs and GTSs in 1980 too (they just didn't make carbed 1980 US models). |
Hans E. Hansen (4re_gt4)
Intermediate Member
Username: 4re_gt4
Post Number: 1479
Registered: 4-2002
| | Posted on Wednesday, June 11, 2003 - 2:13 am: | |
Yeah, Jay, those are the #'s shown for 1974-1980 GT4s. I didn't know they built GT4s in 1980. Hell, I'm just happy that they admit to building them at all!! |
Jay Grande (Jay)
Intermediate Member
Username: Jay
Post Number: 1384
Registered: 10-2001
| | Posted on Tuesday, June 10, 2003 - 7:29 pm: | |
Thanks Hans, but is it the same part number for GT4's as it is for the other 308's? |
Hans E. Hansen (4re_gt4)
Intermediate Member
Username: 4re_gt4
Post Number: 1478
Registered: 4-2002
| | Posted on Tuesday, June 10, 2003 - 7:18 pm: | |
The catalog at the Owner's Site shows 105844/105845 for all GT4s. There was a supersession involved, so maybe you're seeing an old part number. |
Jay Grande (Jay)
Intermediate Member
Username: Jay
Post Number: 1382
Registered: 10-2001
| | Posted on Tuesday, June 10, 2003 - 4:55 pm: | |
Thanks Steve! But I believe the early GT4's have a different inner bearing than a 308. The outside is the same. Anyone have different numbers? |
Steve Magnusson (91tr)
Intermediate Member
Username: 91tr
Post Number: 1860
Registered: 1-2001
| | Posted on Tuesday, June 10, 2003 - 4:41 pm: | |
Jay -- Robert Bowser posted the following on the FList circa 7/2000:
<<<start>>>
Front wheel bearings for a '78 308:
Outer --
Bearing: LM11949
Race: LM 11910
Inner --
Bearing: LM67048
Race: LM67010
If you buy them at NAPA, the inner set is BR6, the outer set is BR2
Bob
<<<end>>>
My 161/78 SPC shows the correspond F PNs as:
105844 Inner
105845 Outer
|
Jay Grande (Jay)
Intermediate Member
Username: Jay
Post Number: 1376
Registered: 10-2001
| | Posted on Tuesday, June 10, 2003 - 3:35 pm: | |
Ferrari of Ontario quoted me $75 each for the inner front wheel bearings today! So I did some shopping around. Trutlands wanted $110 each for inner, outer bearings and the seal. Ferrari UK was around $8 BP for the inners and $5 BP for the the seal (forgot to check the price of outers).
Anyway, I found that TIMKIN tapered roller bearing #LM11949 is an exact fit for the outer bearing and they only cost me $7 each. The inner bearing and the seal was harder to find. If anyone has an old set of front bearings lying around, please post the number that is on them. My old bearings are so worn that you can't read the number on it anymore! |