| Author |
Message |
Verell Boaen (Verell)
Member
Username: Verell
Post Number: 850
Registered: 5-2001
| | Posted on Thursday, June 19, 2003 - 1:28 pm: | |
David over-simplified a step. It should read:
"
remove bolts at each end of muffler
remove muffler ie: drop it on your big toe...(Heheheh)
"
Sorry, couldn't resist.
|
chaz richards (Chaa)
New member
Username: Chaa
Post Number: 19
Registered: 5-2003
| | Posted on Wednesday, June 11, 2003 - 9:09 am: | |
I know where you are comming from Dave.Its just that i was sick of borrowing my bosses F***ing Ferrari's so i brought my own,even though its not a 360. But its mine all mine!! And hey i saw Crokket and Tubbs in Miami Vice do sucsesful undercover survalance opps in a white TR. HA! HA! C |
david handa (Davehanda)
Member
Username: Davehanda
Post Number: 950
Registered: 5-2001
| | Posted on Tuesday, June 10, 2003 - 7:42 pm: | |
Chaz, noticed your occupation...not exactly "flying below the radar" with a 328 are you? :-)
Dave
www.insightstraining.com |
david handa (Davehanda)
Member
Username: Davehanda
Post Number: 949
Registered: 5-2001
| | Posted on Tuesday, June 10, 2003 - 7:39 pm: | |
Not hard. You will need the following:
Jack
jack stands
wheel chocks
Phillips #2 screw driver to remove exhaust shroud
3/8" socket set
metric wrenches
metric ratcheting wrenches
1 helper
*note: A lift makes this job MUCH easier.
remove exhaust shroud
remove mesh cover
remove three bolts that connect exhaust to cat
remove bolts at each end of muffler
remove muffler
bring new muffler into place and attach bolts at each end, leave loose.
connect up three bolts that attach muffler to cat.
Note relationship of three bolts, they must be tightened evenly to allow muffler tips to extend out back evenly. This may require some trial and error. Once satisfied, tightend bolts at each end of muffler.
attach mesh screen
attach shroud.
Enjoy! |
chaz richards (Chaa)
New member
Username: Chaa
Post Number: 17
Registered: 5-2003
| | Posted on Tuesday, June 10, 2003 - 6:41 pm: | |
Expecting my new exhaust soon. How hard is it to drop the exhaust on a 328,and what is the precedure for this task please.C |