308 speedo Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A Archives » Archive through June 30, 2003 » 308 speedo « Previous Next »

Author Message
Mike Charness (Mcharness)
Member
Username: Mcharness

Post Number: 622
Registered: 8-2002
Posted on Friday, June 13, 2003 - 6:19 pm:   

I've gotten just the speedo casing from Rutlands a few years ago when I cracked mine. I think it was around $30 at the time.
david handa (Davehanda)
Member
Username: Davehanda

Post Number: 980
Registered: 5-2001
Posted on Friday, June 13, 2003 - 11:58 am:   

How about checking the cost of a new one from Ferrari UK?
C.C.ofAtlanta (Atlantaman)
Junior Member
Username: Atlantaman

Post Number: 205
Registered: 3-2002
Posted on Friday, June 13, 2003 - 10:36 am:   

check with T.Rutlands- went over speedo shopping last week and he had about 10--some in not so good shape
John Millard (Jmillard308)
New member
Username: Jmillard308

Post Number: 7
Registered: 5-2003
Posted on Friday, June 13, 2003 - 9:49 am:   

Thanks Barney
I have tried them but they were unable to help
Regards
John
Barney Guzzo (Trinacria)
Member
Username: Trinacria

Post Number: 269
Registered: 8-2002
Posted on Friday, June 13, 2003 - 9:32 am:   

These guys were reccommended on this site before.

http://www.paspeedo.com/
John Millard (Jmillard308)
New member
Username: Jmillard308

Post Number: 6
Registered: 5-2003
Posted on Friday, June 13, 2003 - 1:21 am:   

David F - herewith speedo pic.
Andrew - as I only need the casing, any offer I made would probably be insulting
David H - tried that without success so far - can't even find a Veglia site or dealers
As you can see, someone has had a go at the front of the casing and the bezel won't hold
Thanks for your assistance
Regards
JohnUpload
david handa (Davehanda)
Member
Username: Davehanda

Post Number: 969
Registered: 5-2001
Posted on Wednesday, June 11, 2003 - 11:02 pm:   

Try doing a "google" search for speedometer repair...there are tons of shops that specialize in repair and restoration,,,bound to find someone with a spare bezel
Andrew A. Illes (Andyilles)
Junior Member
Username: Andyilles

Post Number: 96
Registered: 10-2002
Posted on Wednesday, June 11, 2003 - 9:47 pm:   

John, I have a practically new (old) 80 mph from my '76 Euro 308 conversion. Dunno what it's worth, make some offer ok?

Best regards,
Andy
David Feinberg (Fastradio2)
Junior Member
Username: Fastradio2

Post Number: 216
Registered: 4-2002
Posted on Wednesday, June 11, 2003 - 1:18 pm:   

John,
I may have a ultra-low KM speedo which I took out of my 308 or 328 when the DOT conversion was done. Unfortunately, I can't remember which car it came from...Post a picture of your speedo...

Regards,
David
John Millard (Jmillard308)
New member
Username: Jmillard308

Post Number: 5
Registered: 5-2003
Posted on Wednesday, June 11, 2003 - 8:29 am:   

I wonder if anyone can help - the speedo casing of my '76 308 has cried "enough" and has cracked at the front lip where the bezel attaches. Would anyone have a "dead" speedo that I could use for the casing? Alternatively, where I could source the necessary part.
Thanks

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration