| Author |
Message |
Marq J Ruben (Qferrari)
New member
Username: Qferrari
Post Number: 18
Registered: 2-2002
| | Posted on Thursday, April 18, 2002 - 8:33 pm: | |
True, the horse, the 'Ferrari' on the trunk, even the Pininfarina badge on the side have pins/nuts. However, the 328 & GTS or GTB logo are applied with tape.
I bought a new set recently from the dealer and they come with pre-applied d/s tape.
|
magoo (Magoo)
Advanced Member
Username: Magoo
Post Number: 2515
Registered: 2-2001
| | Posted on Thursday, April 18, 2002 - 7:49 pm: | |
Sorry, I guess they changed it when they went from the 308 to the 328. |
magoo (Magoo)
Advanced Member
Username: Magoo
Post Number: 2514
Registered: 2-2001
| | Posted on Thursday, April 18, 2002 - 7:47 pm: | |
Cory, I agree with Ed. On my 308 allemblems are secured with nuts including the name Ferrari across the trunk. I don't know why yours would be different. Are you sure they are put on with tape? Normally a heat gun is used if they are taped on. |
Marq J Ruben (Qferrari)
New member
Username: Qferrari
Post Number: 17
Registered: 2-2002
| | Posted on Thursday, April 18, 2002 - 7:45 pm: | |
The 328 and the GTS emblems on the rear, at least on my 88.5, are secured with double-sided tape, not mechanical fasteners. I removed mine with warm/hot air from a hair dryer and reapplied them with a really good quality, exterior grade, d/s tape.
|
Edward Gault (Irfgt)
Intermediate Member
Username: Irfgt
Post Number: 1110
Registered: 2-2001
| | Posted on Thursday, April 18, 2002 - 7:04 pm: | |
They have nuts on the back side of the rear body panel if my memory is correct. |
cory mitchell (Mitch328)
New member
Username: Mitch328
Post Number: 20
Registered: 8-2001
| | Posted on Thursday, April 18, 2002 - 5:33 pm: | |
Does anybody have any tricks on how to remove these emblems without ruining the paint. What about reinstalling them. Any perticular double sided tape I should look for. Still can't figure out why these emblems ended up where they are now. |