Author |
Message |
Gerrit Visser (Gerritv)
Junior Member Username: Gerritv
Post Number: 201 Registered: 6-2001
| Posted on Thursday, July 03, 2003 - 12:04 pm: | |
Steve The cable goes over the 2 pulleys, not through any holes. |
steve wilcox (Stevew)
New member Username: Stevew
Post Number: 19 Registered: 6-2002
| Posted on Thursday, July 03, 2003 - 2:54 am: | |
Mitchell Thanks for that.On this exploded view it does not show wether the cable passes through the hole in item no 13 or it runs over the top.It looks more natural passed through the hole. STEVE |
Mitchell Le (Yelcab1)
Member Username: Yelcab1
Post Number: 573 Registered: 11-2001
| Posted on Wednesday, July 02, 2003 - 6:38 pm: | |
Here it is.
|
steve wilcox (Stevew)
New member Username: Stevew
Post Number: 18 Registered: 6-2002
| Posted on Wednesday, July 02, 2003 - 2:19 pm: | |
I have just stripped and cleaned the pivot/pulley assy on my 308qv.My question is does the cable pass through one pulley,then through the hole in the pivot pin and then through the other pulley. I should have taken more notice when I took it off. Cheers STEVE |