| Author | Message | ||
| magoo (Magoo)
Advanced Member Username: Magoo Post Number: 2609 Registered: 2-2001 |
Any Auto Store has the funnels with a long flex tube and a tapered end. | ||
| Ric Rainbolt (Ricrain)
Junior Member Username: Ricrain Post Number: 58 Registered: 2-2002 |
The procedure is the same. Use a funnel with a flexible hose attachment. | ||
| Craig Dewey (Craigfl)
Member Username: Craigfl Post Number: 359 Registered: 1-2001 |
I used the funnel with the long tube. I consider myself a good shot but not that good  | ||
| John Cortina (Johncort)
New member Username: Johncort Post Number: 39 Registered: 3-2001 |
Hi all, I have read in past postings regarding tranmission fluid change for the 308 series cars that it is easier to fill the fluid from the top of the clutch housing fill hole. Which will run down to the resevoir, level, overflow into the case and when topped off will come out the fill on the side of the case. Those this same procedure apply to the 328 series cars as well. Do you need any special long tube with funnel attached or is there enough room for the the oil container to pour from. Thanks for your advise. John. |