| Author |
Message |
Kelly (Tifosi1)
Member
Username: Tifosi1
Post Number: 689
Registered: 2-2002
| | Posted on Saturday, July 05, 2003 - 10:24 pm: | |
I got to keep it interesting. Boy I ogt alot more power with those new rotor and valve job.
|
Verell Boaen (Verell)
Member
Username: Verell
Post Number: 920
Registered: 5-2001
| | Posted on Saturday, July 05, 2003 - 9:57 pm: | |
My tongue is starting to bleed I'm biting it so hard..... |
Kelly (Tifosi1)
Member
Username: Tifosi1
Post Number: 686
Registered: 2-2002
| | Posted on Saturday, July 05, 2003 - 8:48 pm: | |
NEVER MIND
I bent the heat shield up away from the shift shat and everythign works great.
Kelly |
Kelly (Tifosi1)
Member
Username: Tifosi1
Post Number: 685
Registered: 2-2002
| | Posted on Saturday, July 05, 2003 - 6:57 pm: | |
The motor is running great. I rolled it out the driveway and put it in first and it would not go into gear. I mean you could not move the shift leaver forward or backwards.
I tryed putting it in reverse and got grinding.
Now I do remember using the exhaust shield to get the altenator backup towards the motors so I could put the belt on.
Do you think I bent the exhaust shield down on the shift shaft so much that it will not shift??????
30 days of work, a track day tomorrow and no car.
Thanks
Kelly |