Author |
Message |
Henryk (Henryk)
Member Username: Henryk
Post Number: 949 Registered: 8-2001
| Posted on Sunday, July 20, 2003 - 6:08 pm: | |
Jeff: It appaears that one does not have to remove the engine lid, as the instructions state. I see the grill section, in front of the lid, on the floor in the picture. Did it have to come out? Thanks |
Jeff Green (Carguy)
Member Username: Carguy
Post Number: 379 Registered: 10-2002
| Posted on Tuesday, July 15, 2003 - 10:47 am: | |
Henryk...I remove each item as it is stated in the shop manual(except for exhaust), going down the list and checking each one off as I do it. For those who don't have a manual, I will sit down tonight and try and make a list in the order of removal. Eugene...I will replace the belts, the main seal, and redo the waterpump. I would also like to change out the coolant hoses, and any others suspect. Also replace any "weeping" gaskets. I would like a leak-free engine if possible. Lastly do a thorough engine and engine-bay detailing. Thanks to all for your comments and support. |
William Henderson (Billh)
Junior Member Username: Billh
Post Number: 62 Registered: 5-2002
| Posted on Tuesday, July 15, 2003 - 10:39 am: | |
omg....you can eat off those parts. how many miles are on your car??? mine looks like it has 200k miles compared to these..... |
Eugene Angelo (Eangelo)
Junior Member Username: Eangelo
Post Number: 54 Registered: 8-2001
| Posted on Monday, July 14, 2003 - 11:09 pm: | |
Wow!! Very exciting stuff. Good luck with everything. I guess your are going to replace the belts. What else do you have planned? |
Steve M (Steve308gtsi)
Junior Member Username: Steve308gtsi
Post Number: 116 Registered: 5-2002
| Posted on Monday, July 14, 2003 - 10:54 pm: | |
Looks good so far. Keep us updated. Oh yes and keep adding pix. |
Henryk (Henryk)
Member Username: Henryk
Post Number: 924 Registered: 8-2001
| Posted on Monday, July 14, 2003 - 10:31 pm: | |
Jeff: It would help if you would label these numerically, in the order that they where removed. |
Henryk (Henryk)
Member Username: Henryk
Post Number: 922 Registered: 8-2001
| Posted on Monday, July 14, 2003 - 8:23 pm: | |
Looks like your half way home!!!!LOL I would recommend that you cover the throttle bodies......no telling what can fall in. |
Jeff Green (Carguy)
Member Username: Carguy
Post Number: 377 Registered: 10-2002
| Posted on Monday, July 14, 2003 - 8:17 pm: | |
This is my car currently. I have been following the steps as outlined in the manual. My manual had Mondial info. for this section, but Henryk was kind enough to copy and send me the correct pages. They are invaluable. Here are some pics, sorry they aren't very clear. I suck at taking pictures, but I tried. Here are some parts I've removed so far: Here is a poor right-rear shot-too dark-sorry: Here is the rear-looking a little bare:
|