| Author |
Message |
James J. McGee (Dr_ferrari)
Junior Member
Username: Dr_ferrari
Post Number: 137
Registered: 7-2002
| | Posted on Saturday, July 19, 2003 - 8:11 pm: | |
James,
Don`t have a PDF, but you may want to check the pins for the door electrical connector(located in the door jam). the 348 is known for water infiltration in the door connectors causing corrosion and rust.
Just open the door and disconnect the plugs, I`m pretty sure you will find your problem there.
Best regards, jim |
Paul Hill (348paul)
Member
Username: 348paul
Post Number: 325
Registered: 12-2002
| | Posted on Saturday, July 19, 2003 - 7:38 pm: | |
James,
I had the same problem with mine - Replaced the switch and fixed the problem.
Not saying that your problem is this, but would defiantly be the first (easiest!) thing to look at.
Paul
|
Jeff B. (Miltonian)
Member
Username: Miltonian
Post Number: 449
Registered: 12-2002
| | Posted on Saturday, July 19, 2003 - 2:50 pm: | |
Hi, James: Are your mirrors completely dead, or just not working properly on both sides in all directions? I don't have the diagram in PDF, but I could possibly print a copy from the shop manual and send you the information, if that would help at all.
My mirrors didn't work in all directions when I got the car, I removed the switch, took it apart, cleaned the contacts, put it back together, it has worked fine for 3 years now. |
James I. Movich (77_308gt4)
New member
Username: 77_308gt4
Post Number: 7
Registered: 2-2003
| | Posted on Saturday, July 19, 2003 - 10:12 am: | |
does anyone have a wiring diagram PDF they can share? i need to trace my mirror adjuster so they work. running around to move the mirror on the other side of the car is a pain! |
|