Author |
Message |
Gianluca Chegai (Gianluca)
New member Username: Gianluca
Post Number: 11 Registered: 5-2003
| Posted on Saturday, July 26, 2003 - 7:18 pm: | |
Thanks!!! It worked out perfectly. Gianluca
|
Mitchell Le (Yelcab1)
Member Username: Yelcab1
Post Number: 600 Registered: 11-2001
| Posted on Saturday, July 26, 2003 - 6:16 pm: | |
Turn the distributor cap upside down and look inside, gently pry out the center carbon pin with the small spring underneath. Be careful not to ruin the spring, you will need it later. Look inside the hole, you will see a small screw that will need to be unscrewed. The wire will slide out after that. |
Gianluca Chegai (Gianluca)
New member Username: Gianluca
Post Number: 10 Registered: 5-2003
| Posted on Saturday, July 26, 2003 - 4:55 pm: | |
Hi, does anyone know how to remove the coil wire from a distributor? I can not see any screws. Thanks, Gianluca |
|