| Author | Message | ||
| philip loulis (Ria)
New member Username: Ria Post Number: 20 Registered: 3-2003 |
can, anybody take a, closeup picture of the wire mesh and post it, the car came with out the wire mesh i, do not know what the OEM wire should look like this will help me decide. again i, want to THANK all of you. | ||
| philip loulis (Ria)
New member Username: Ria Post Number: 19 Registered: 3-2003 |
jeff the ferrari del i, call here in US do not have it, if you can geet it please leet me know. | ||
| JohnR. (Rivee)
Member Username: Rivee Post Number: 255 Registered: 1-2002 |
Correction, It's not the same stuff. It's simular but if you notice that the original mesh's holes are perfectly aligned with each other when you look down it, where the metal lath at HD is not. It's fairly crooked. Also it is made differently than original. The holes are a different shape, and they use galvanized metal @ HD for the lath. If you don't mind the diff. than it's your choice, but make sure you get the 3.4lb mesh and not the 1.7lb because it's thicker and heavier | ||
| Jeff Howe (Ferrari_uk)
Member Username: Ferrari_uk Post Number: 476 Registered: 12-2002 |
Hi all. Philip - you say you called Ferrari. Who did you call ? We can supply (nearly) all your 308 needs from here in the UK with competetive Fedex shipping. Sounds like Home Depot is the answer this time  Cheers | ||
| mike 308 (Concorde)
Member Username: Concorde Post Number: 258 Registered: 8-2002 |
Actually, the source for the wire mesh was already on this site. If you click on "Parts & Service" in the menu at the top of this page, it will eventually link you to www.ferrarichat.com/partsandservice/308PartsXref/ and the info is there. | ||
| philip loulis (Ria)
New member Username: Ria Post Number: 18 Registered: 3-2003 |
i, like to, thank all of you for the help on this and most of all, mike for helping me find the wire mesh. ha, ha, | ||
| mike 308 (Concorde)
Member Username: Concorde Post Number: 256 Registered: 8-2002 |
Philip, I can tell that english is not your first language. We can understand you fine, but I thought I'd let you know that all those commas are not necessary and actually make reading your text more difficult. | ||
| Steven R. Rochlin (Enjoythemusic)
Member Username: Enjoythemusic Post Number: 633 Registered: 4-2002 |
Philip is correct :-) | ||
| Philip Airey (Pma1010)
Member Username: Pma1010 Post Number: 338 Registered: 7-2002 |
I believe it is the same stuff as at Home Depot. Just need to cut to size and paint. | ||
| philip loulis (Ria)
New member Username: Ria Post Number: 17 Registered: 3-2003 |
i, have a, 1980 308gtsi i, can not find the wire mesh, that goes under, the rear, grill, does anybody, know, where, i, can geet one, i, call ferrari no luck. no used ones out there. can someone, help. thanks |