| Author |
Message |
Gianluca Chegai (Gianluca)
New member
Username: Gianluca
Post Number: 15
Registered: 5-2003
| | Posted on Monday, August 18, 2003 - 4:55 pm: | |
Thank you, Malcom.
Gianluca |
Malcolm West (Ferrari_uk_tech)
New member
Username: Ferrari_uk_tech
Post Number: 45
Registered: 7-2003
| | Posted on Monday, August 18, 2003 - 10:57 am: | |
Easiest way is to remove both seats, undo screws that secure the centre consol to the floor and you can, if you're careful adjust the position of the switch without any major dismantaling - if you require a new switch they cost about $64
MW |
Gianluca Chegai (Gianluca)
New member
Username: Gianluca
Post Number: 14
Registered: 5-2003
| | Posted on Friday, August 15, 2003 - 6:45 pm: | |
Hi, my back-up lights do not work due to the fact that the shifter does not push the switch deeply enough.
Is there an easy way to adjust the switch? From what I have seen, it seems I have to take half of the car apart to get to the bolts. (Ok...half is better than taking the whole car apart...)
Thanks for any help, Gianluca
|
|