| Author |
Message |
Jerry H (Jerry)
Junior Member
Username: Jerry
Post Number: 105
Registered: 3-2001
| | Posted on Tuesday, May 07, 2002 - 7:35 am: | |
Bret you are correct. I removed the panel for access. |
BretM (Bretm)
Advanced Member
Username: Bretm
Post Number: 2574
Registered: 2-2001
| | Posted on Monday, May 06, 2002 - 7:21 pm: | |
I think he means the speaker hole in the inside of the door, after you pull the panel. |
J. Grande (Jay)
Member
Username: Jay
Post Number: 354
Registered: 10-2001
| | Posted on Monday, May 06, 2002 - 6:22 pm: | |
Why not remove the whole door panel? Wouldn't it be easier? |
Jerry H (Jerry)
Junior Member
Username: Jerry
Post Number: 104
Registered: 3-2001
| | Posted on Monday, May 06, 2002 - 7:35 am: | |
Well Sunday afternoon I finally got down to pulling my window motor out and re greasing it. It took about 5 hrs and alittle swearing but my passenger side window works great now. I did the whole operation through the speaker hole. The wire system used by Ferrari is rather odd but it works well once you get it cleaned . The hardest part was wraping the cable around the spool correctly when reinstalling the motor. This took the most time. One must be sure to get this right or the tension will not be even on the cables. FWIW I will follow this post up with "my" version of this proceedure. |