| Author |
Message |
magoo (Magoo)
| | Posted on Thursday, January 31, 2002 - 9:05 pm: | |
No problem Jorma. Just a different application that's all. BRGDS |
Jorma Johansson (Jjfinland)
| | Posted on Thursday, January 31, 2002 - 1:10 am: | |
Sorry, I have taken of these badges in F40, there you have them in both sides and fastened with dobleside tape. |
magoo (Magoo)
| | Posted on Wednesday, January 30, 2002 - 9:29 pm: | |
I know Dave, Everytime I hear that it makes me gives me pains in my lower extremities. |
david schirmer (David)
| | Posted on Wednesday, January 30, 2002 - 9:19 pm: | |
Poor Tinnerman
...sorry I couldn't resist. |
magoo (Magoo)
| | Posted on Wednesday, January 30, 2002 - 8:02 pm: | |
There definetly is not any doublestick tape on the back of it. I would start by removing the L?R inner fender and use a flashlight do determine where it is . I would guess it is held in place by tinnerman's nuts. |
Mitchel DeFrancis (4re308)
| | Posted on Wednesday, January 30, 2002 - 3:19 pm: | |
Negative. The PF badge has 2 prongs that go into the body. There is a small plastic cap on the back of the emblem prongs that holds it onto the body. Unfortunately I do not know how to remove it. I would think you could carefully pry it off with a screwdriver and a towel? I don't really know. |
Jorma Johansson (Jjfinland)
| | Posted on Wednesday, January 30, 2002 - 1:41 pm: | |
It is only ordinary double side tape.Cut it out carefully and clean the badge and by some tape to remount. |
Dirk Rabenschwanz (Dirk)
| | Posted on Wednesday, January 30, 2002 - 1:10 pm: | |
I want to prepare my car for a paintjob.
But it seems thats a little bit difficult,
to remove the pininfarina badge on the
letft side of my 308.
Whats Your experience ?
Dirk |