| Author |
Message |
Steve Smith (Steve308)
New member
Username: Steve308
Post Number: 19
Registered: 2-2002
| | Posted on Friday, July 12, 2002 - 2:04 am: | |
Thanks guys - great info! |
Barry Wolinsky (308gtb)
Junior Member
Username: 308gtb
Post Number: 179
Registered: 2-2002
| | Posted on Thursday, July 11, 2002 - 5:30 pm: | |
"Tubo scarico condensa," as you said, Steve. |
Steve Magnusson (91tr)
Member
Username: 91tr
Post Number: 831
Registered: 1-2001
| | Posted on Thursday, July 11, 2002 - 2:58 pm: | |
I think it's better termed the "AC condensation drain" -- although "vent pipe" is a reasonable alternative that conveys enough meaning and is not unsimilar to what one should expect (and will see) in technical translations -- JMO.
|
'75 308 GT4 (Peter)
Intermediate Member
Username: Peter
Post Number: 1903
Registered: 12-2000
| | Posted on Thursday, July 11, 2002 - 2:01 pm: | |
The felt weather channel I bought from a local auto glass store ("Speedy Auto & Window Glass"), here in B.C., Canada.
I'm not sure of the manufacturer's name, but it came from CA. Model# 8A2 Flexible. It is EXACTLY the same as the original stuff for ALOT less than I.C.P. or any other F supplier ($26 Cdn per 8ft length). You'll need 20ft total (10ft per door, which does both quarter and main windows).
Replacement is not that difficult, yes you will need to remove the windows from the doors, but it isn't difficult at all. For the main window, un-do the two nuts holding the wind-up cable, slide down, tilt forwards a bit and then tilt out, then lift up and out. For the quarter window, drill out the two pop-rivets holding the metal plate on the bottom, slide window down and twist out. |
Barry Wolinsky (308gtb)
Junior Member
Username: 308gtb
Post Number: 170
Registered: 2-2002
| | Posted on Thursday, July 11, 2002 - 11:16 am: | |
Steve,
That is indeed the air conditioner vent pipe.
Barry |
Frank Parker (Parkerfe)
Intermediate Member
Username: Parkerfe
Post Number: 1057
Registered: 9-2001
| | Posted on Thursday, July 11, 2002 - 9:47 am: | |
Great looking car Steve ! check T.Rutlands 770.493.8852 for the parts you need. |
Steve Smith (Steve308)
New member
Username: Steve308
Post Number: 18
Registered: 2-2002
| | Posted on Thursday, July 11, 2002 - 8:49 am: | |
Dino 308
(Sorry.. thought the user name would make it clear!) |
Frank Parker (Parkerfe)
Intermediate Member
Username: Parkerfe
Post Number: 1051
Registered: 9-2001
| | Posted on Thursday, July 11, 2002 - 8:24 am: | |
Which GT4, the 365 GT4, 365 GT4BB or the Dino 308 GT4 ? |
Steve Smith (Steve308)
New member
Username: Steve308
Post Number: 17
Registered: 2-2002
| | Posted on Thursday, July 11, 2002 - 7:46 am: | |
The fabric covered seal round the door window glass on my GT4 is getting worn and frayed. Is this replaceable - and if so how difficult is it? It looks like the whole channel the windows runs up and down in would need to be swapped. Italian Car Parts stock "fuzzy strips" - but I'm not sure if this is the right stuff. Anyone help?
One other question - what's the vent pipe sticking out of the undertray between the front wheels? Air con? |