| Author |
Message |
Neil Green (Neilg)
| | Posted on Monday, May 21, 2001 - 3:31 pm: | |
Steve, thanks for the good information....I will check out these sources....... |
Steve Magnusson (91tr)
| | Posted on Monday, May 21, 2001 - 12:46 pm: | |
Neil � try Pierce Manifolds at http://www.piercemanifolds.com (I had talked with them circa 1992 about rebuilding, but wound up buying a set of �new slightly incorrect� 4-bolt top cover 40DCNFs instead from Fast Freddy�s). Also see:
http://www.yourlog.com/discus/messages/21/992.html?#POST4730
for price info about buying �new exact� (Partsource) and �new slightly incorrect� (Superformance) for comparison.
Two things I�d want to know about from any rebuilder:
1. Will all the (leaky) lead plugs be replaced?
2. What about wear (if any) in the throttle bores from the throttle plates.
Good luck... |
Neil Green (Neilg)
| | Posted on Monday, May 21, 2001 - 12:15 pm: | |
Does anyone know if there is a facility which will rebuild/refurbish Weber 40DCNFcarbs (from a '77 308GTB) if removed, and sent directly to them? I'm looking to have this service performed, but to date have only been able to find suppliers of parts only, not refurbishing services....any information would be appreciated...thanks... |
Warren E. Smith (Magoo)
| | Posted on Sunday, May 13, 2001 - 9:41 pm: | |
You're right Bill, G.T. Car Parts is a good source for reasonable prices on Ferrari parts. I have dealt with them before. Ask for Bill or Dave. MAGOO |
Bill Sebestyen (Bill308)
| | Posted on Sunday, May 13, 2001 - 8:34 pm: | |
Bob, I'm in the process of rejetting the 40 DCNF carbs on my 78 308, after a rebuild. I purchased a bunch of jets and air correctors from the vendor referred to by Warren (www.webercarbs.com). However, I got my best prices from GT Car Parts in AZ, but you'd have to call them at 623-780-2200. |
Warren E. Smith (Magoo)
| | Posted on Saturday, May 12, 2001 - 7:49 am: | |
ROBERT, Type in WEBER CARBS .com under search on your computer. Has all the info you need on Weber Carbs. MAGOO |
Robert Zambelli (330z)
| | Posted on Monday, April 30, 2001 - 12:44 pm: | |
Anybody know a good source for Weber parts, including rebuild kits and especially jets? I especially need a list of all the factory jets for my 1967 GTC, US model.
Thanks, Bob |
|