What is the 308 engine part? (pic att... Log Out | Topics | Search
Moderators | Edit Profile

FerrariChat.com » Technical Q&A Archives » Archive through August 12, 2002 » What is the 308 engine part? (pic attached) « Previous Next »

Author Message
Bill Sebestyen (Bill308)
Member
Username: Bill308

Post Number: 293
Registered: 5-2001
Posted on Wednesday, July 31, 2002 - 6:44 pm:   

It looks a bit like a diverter valve for an air injection system.
David Prall (Davidpra)
Junior Member
Username: Davidpra

Post Number: 112
Registered: 2-2001
Posted on Wednesday, July 31, 2002 - 6:14 pm:   

Looks like a vacuum vent valve --- plumbed in as part of the emissions breather circuits. It looks like a non-standard part --- perhaps a universal type added by some earlier owner. Also, it appears to be non-functional (vacuum ports are not connected to anything).

I've seen the engine bays of a boat-load of 308's (including Euros), but I've never seen that particular item on any of them.
j scott leonard (Jscott)
Junior Member
Username: Jscott

Post Number: 145
Registered: 1-2002
Posted on Wednesday, July 31, 2002 - 4:55 pm:   

Very good Ben, great humor!
Bill Sebestyen (Bill308)
Member
Username: Bill308

Post Number: 292
Registered: 5-2001
Posted on Wednesday, July 31, 2002 - 4:53 pm:   

Andrew,
What does the existing hose connect to?
Andrew Chapman (Xx7xx)
Junior Member
Username: Xx7xx

Post Number: 52
Registered: 8-2001
Posted on Wednesday, July 31, 2002 - 10:39 am:   

It is a euro version. I looked real well in the engine bay for a hose that should be connected to the male end of this piece. I did not find any loose hoses dangleing in my engine. It is possible that the hose was disconnected at both ends and dropped out of the engine completely.
Ben Millermon (Brainsboy)
New member
Username: Brainsboy

Post Number: 34
Registered: 5-2001
Posted on Wednesday, July 31, 2002 - 8:15 am:   

Its the Flux Capacitor, be careful driving over 88 mph
Greg Owens (Owens84qv)
Member
Username: Owens84qv

Post Number: 490
Registered: 10-2001
Posted on Wednesday, July 31, 2002 - 5:51 am:   

Ric, my vote is that the coil connections look like a Euro version, but I don't have that item Andrew is pointing at on my car. I'm don't know what that is.
Ric Rainbolt (Ricrain)
Junior Member
Username: Ricrain

Post Number: 201
Registered: 2-2002
Posted on Tuesday, July 30, 2002 - 11:48 pm:   

Is your car a Euro? I'm fairly certain this is not an OEM Ferrari part, but I'm not 100% sure. My Euro TR has one, but it's nowhere in the parts books. It's a vent valve, possibly with rollover protection (the vent closes if the car inverts). On my TR, the lower side connects to the gas tank and the upper side is connected to a hose that vents to the pavement, directly in front of the right rear wheel.
Andrew Chapman (Xx7xx)
Junior Member
Username: Xx7xx

Post Number: 51
Registered: 8-2001
Posted on Tuesday, July 30, 2002 - 10:53 pm:   

Hello,
I have a 1984 308. It the fumes from the exhaust started smelling oily and gasy today so i took a look in the trunk. I noticed there was a metal part under the rear window with a hose on one side, but no hose comming out the other side. The other side hase a male nub which makes me believe that there should be a hose connected. I think it might be some sort of emissions part. I have attached a picture.
Please let me know what that part is & its function. Please also let me know about the missing hose. Thanks for your time.part

Add Your Message Here
Posting is currently disabled in this topic. Contact your discussion moderator for more information.

Topics | Last Day | Last Week | Tree View | Search | Help/Instructions | Program Credits Administration