Author |
Message |
Jim (Jperk)
New member Username: Jperk
Post Number: 1 Registered: 7-2003
| Posted on Thursday, July 17, 2003 - 8:56 pm: | |
Kelly, hope this finds you well and kicking. My very good friend here, Vance Shappley MD, I saw him today,told me he sent in his registration form for the Oct event. He is a great guy and I know everyone will like and welcome him. He has a Maranello, 512BBI and another 512. Hope this gets to you or whoever takes the registration forms, Thanks Jim Perkins Memphis Tn. |
Kelly (Tifosi1)
Member Username: Tifosi1
Post Number: 682 Registered: 2-2002
| Posted on Friday, July 04, 2003 - 10:44 pm: | |
It lives. Ran for about 15 minutes. Lots of smoke from the oil on the headers. I looked at it agian after it cooled off and looks like the smoke is not from leak but from the oil that came out when I lifted the cam covers off. I wanted to thank Paul Wehmer, Bill from GT Car parts and Mike and Jim from Lindsey. Without you guys this could not have happened. Kelly
|
Kelly (Tifosi1)
Member Username: Tifosi1
Post Number: 678 Registered: 2-2002
| Posted on Sunday, June 29, 2003 - 7:58 pm: | |
Here just about everything put back in. Got the AC compressor and belts . I'd like to thank Paul for whom this would have not be possible. The help with the rotor adapter caps to the heli coil and the tools to do and his time and 100 miles one way drive. Frank get jealous, I got a new boy friend. HAHA I will admit one thing about my 2nd 30K. I'm ready to drive the car and I have absolutly no worries that it is going to break.. knock on wood.
|
Kelly (Tifosi1)
Member Username: Tifosi1
Post Number: 663 Registered: 2-2002
| Posted on Wednesday, June 18, 2003 - 8:19 pm: | |
Thanks to Jim and Mike for doing mt vavle job. Here is some updated pics with the cams in and start to trim the gaskets.
|
Kelly (Tifosi1)
Member Username: Tifosi1
Post Number: 660 Registered: 2-2002
| Posted on Sunday, June 15, 2003 - 1:09 pm: | |
Now there you go, i've always thought you were a lot better lookin' than me. HAHA |
Erin Patrick Pierce (Fulmina)
Junior Member Username: Fulmina
Post Number: 110 Registered: 3-2002
| Posted on Sunday, June 15, 2003 - 10:20 am: | |
Hi Kelly. That's OK. Although it would truly be a sorry state of affairs for you and I to have to be in a beauty contest, while in the company of Donny and Tracie I am not the one worthy of a photograph. Do these two ever look bad? Thanks for showing me all the pieces. I am glad it isn't up to me to put it back together again. Well, I DO have Lindsey Automotive on speed dial... Erin |
Kelly (Tifosi1)
Member Username: Tifosi1
Post Number: 659 Registered: 2-2002
| Posted on Saturday, June 14, 2003 - 10:14 pm: | |
Some ugly people showed up to view the 30k today. Sorry Erin, I forgot to show you my new camera. I did get the front belt on and everything is dead on.
|
Kelly (Tifosi1)
Member Username: Tifosi1
Post Number: 651 Registered: 2-2002
| Posted on Monday, June 09, 2003 - 8:33 pm: | |
Cam cover after bead blasting. Who cars if I loose a point at the concorso when they look like this.
|
Kelly (Tifosi1)
Member Username: Tifosi1
Post Number: 650 Registered: 2-2002
| Posted on Monday, June 09, 2003 - 8:26 pm: | |
Blew the water pump, then a rotor was bad, so updated to QV ignition rotors. Me, myself, and I and Paul are doing the work. Kelly |
john w. houghtaling, II (Johnhoughtaling)
Junior Member Username: Johnhoughtaling
Post Number: 150 Registered: 11-2002
| Posted on Monday, June 09, 2003 - 5:00 pm: | |
Kelly: Freshening your baby up or did you have a problem? Who is doing the work? |
Kelly (Tifosi1)
Member Username: Tifosi1
Post Number: 645 Registered: 2-2002
| Posted on Sunday, June 08, 2003 - 8:50 pm: | |
|