Hello, is the suspension setting for the GTS different than for the GT (as for the 308)? WSM (A.Wallace) and Ownersmanual suggests the following: Front 2-3 mm toe-in +0°15' to +0°30' Camber 4° Caster Rear 2-3 mm toe-in -1°15' to -1°30' Camber But this if for earlier Chassis. Is there any difference for E-Series cars and GTS? At the moment i have: Front 3 mm toe-in -0°06' Camber 4.8° Caster Rear 4 mm toe-in -1°30' Camber The Dino drives very reactive to wheigt transfer, so accelerating goes straight and deaccelerating turns in hard. Should i set to the WSM and Owners manual? Thanks in advance!