I replaced the fiberglass liner in my wheel storage area when I first bought my car. I finally went to attach the washer bag today, and can't find any reference to where or how it should attach. Any one have a good picture showing correct location, and how to attach this thing? Thanks, Dave M
Packed mine away 15 years ago but hooks, tubing and cap are still there. I assume you duplicated access door to brake fluid resevoirs. Door is hinged at back and held down in front with a thumbscrew. Look at door from front of car. One bag hook is 1" below thumbscrew. Other hook is about 4" to left (measure your bag). Fluid tubing comes out of a relief under right forward corner of door. Hooks are formed from sheet metal and held on with 2 rivets. Hooks are about 1 1/4" tall and 1/4" wide. 2 rivets are in bottom half, top half bent out and then up to form hook. Good Luck. John
the bag attatches via two hhoks that are riveted into the plastic liner. they are located just to the front of the bolted hatch. Image Unavailable, Please Login
Here is what it looks like in my car Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
That is exactly how my bag attaches. Rutlands/Maranello Auto Parts sells these interior panels and uses the term "batchboard" when referring to them.
Can someone confirm if the washer bag is hung off the same way on the early L-series cars as shown on the pictures above in this old thread. My washer bag is currently mounted with two M6 screws and it doesn't look correct to me. Best regards Peter Image Unavailable, Please Login
Peter, here a picture of an original L serie washerbag. Regards, Alvaro Image Unavailable, Please Login
Thanks Alvaro....Perfect picture. I now need to repair two holes in the fiberglass liner and produce a couple of hooks. Peter