Bosch connector kits

Eagle Day perhaps???

Electrical

 

Also,

Junior Power Timer Housings

Everything you need, connectors, boots, pins, crimper. If you insist on gold pins you can get them from Mouser. http://www.mouser.com/TE-Connectivity/Automotive-Connectors/Junior-Power-Timer-Series/_/N-1yzs6iiZ1ehb5Z1yzms27

And the removal tools for a good price: http://www.polevolt.co.uk/acatalog/info_TT99.html

 

I bought some stuff from Eagle Day.... But some where else too...

Wait, this place maybe:

Electrical Supplies : EFI Express

 

Motorsports wiring? Their site is down at the moment.

 

It's been down for a while. Still doing business???

 

I'm still looking for 02 sensor plugs & sockets

 

Was it maybe Digi-Key? DigiKey Electronics - Electronic Components Distributor

 

For O2 sensors, I think this is it.

Weather Pack 4 Pin Square Sealed Wiring Connector Kit - HiPo Parts Garage

 

Much appreciated I am trying them

 

Mitchell which connector are you looking for? I just went through this sourcing the mate for the exhaust ecu connections.

Delphi made the wiring harness in our cars and most of the connectors I see are weather pack. Look at the online catalog at this place. Go to weather pack in it and identify the connector you are looking for and then google that part.

I ended up at a small specialty place in PA for one side of the ecu which was weather pack. The other connector is an AMP but that was the thermocouple I'll post the link to tomorrow it's at the office.
http://www.whiteproducts.com/faqs.shtml

 

EFI Connection, LLC - Connector Search

This is where I got the delphi side of the ecu from. Use the search tool to specify how many cavities and you might see what you're looking for.

 

Great info here.

Can anyone point me in the direction of the 2 and 3 wire connectors on my M2.7 motronic harness...like the connectors for the fuel injectors, etc....especially the female ones...in case i damage any when removing to install the gold connector kit?

 

See post 4, JPT Housings. See the other links in the post for crimpers, gold pins etc. No need to spend big bucks on the GKK.

 

What kind of crimp tool are you folks using?

I would like a high quality one. Currently I have a drawer full of then from the 70's on LOL

 

I just have a good stripper/crimper I got from the Boat Store. It isn't a fancy latching thing. I just take my time and curve and roll the crimps over. If I had to do a lot I would get the more sophisticated things.

I don't want to open the GCK debate again but are you replacing pins on both sides of the connector or just the female ones?

 

Only the female ones to be replaced

 

Can you post a few picks of the pins? Have you started the project?

 

Excellent find.
Thankyou.

Do you think or know if this....

J.T. Female connector. With release clip. Black. 2 way.: 20900

Is the same connector as used on a Bosch M2.7 harness?

 

Yes it is.

 

Well this is wonderful news.

Thanks again

I forgive you your grumpiness